k24a4 engine stand bolts
what pitch and how long basicly what bolts do i need for the engine stand to hold it to the block and can i buy them at a hardware store? and how far do they need to go into the block so they dont snap off and so they secure the engine ty
|
Use tranny bolts
|
i only have one tranny bolt should i just go to hardware store and match length and pitch
|
Yes and you would also want the bolt to be screwed in as much as possible so that the bolts won't rip the threads out of the motor once you put it up on the stand.
|
ive come to a part and im stuck atm i got the auto tranny off the k24a4 but i cant see to find a way to get the flywheel thingy off the bolts are on the reverse side so i would need to turn the flywheel to acces them but me engine is seized up so im unsure how to go from here
|
Seized up , meaning your unable to turn the crank with a ranchet or breaker bar perhapes?
|
yes
|
Wow it must be pretty bad to the point where the motor is locked up , my only suggestion is your probably gona have to pull the motor apart and take the crank out along with the flex plate and torque converter.
|
so whats the point of having this motor for you?
|
fml im just gonna sell the whole thing and not have to mess with it anymore
|
M12-1.25x70mm ish
yw |
All times are GMT -7. The time now is 11:28 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021