AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   RSX + EP3 (http://www.azht.net/forum/forumdisplay.php?f=87)
-   -   Whats Wrong With My DC5?? (http://www.azht.net/forum/showthread.php?t=79338)

Jh4Dc5 10-20-2008 10:36 PM

Whats Wrong With My DC5??
 
Well I was f*cking around in my ride today and its acting up now:dumbass:. For one it smells like sh*t, its a burning smell. It doesnt launch anymore, and when I floor it, the rpms go up fast but the car is not speeding up! It feels stupid slow and heavy like if I were hauling boat! I hope its the clutch, but I don't know?

Jstarda9 10-20-2008 10:38 PM

sounds like slipping clutch

TK-421 10-20-2008 10:38 PM

What exactly where you doing?

Jh4Dc5 10-20-2008 10:40 PM

Burning the tires and trying to do it with my E brake up

FranktheTank 10-20-2008 10:44 PM

Clutch is toasted then.
Good job!

You now need a new Pressure plate and flywheel.

Jh4Dc5 10-20-2008 10:47 PM

Would you happen to know where I can get a good price?

FranktheTank 10-20-2008 10:51 PM

Try looking in the vendors section on Honda-tech.
get some prices from there, and search locally at like Boostflow and Tri-tech and such......then compare!

that one guy 10-21-2008 01:30 AM

bro you burned up your clutch. I bought a clutch for my teg from this seller:



should be ~$150 for OEM exedy clutch, pressure plate, alignment tool. you can probably get it by fri if you order this morning

Ls91ef 10-21-2008 06:23 AM

:lmao::thumbup:

Dead Bird 10-21-2008 07:09 AM

lol i hope you werent somewhere on bell. i heard someone screaching their tires for a good half hour today. i was playing guitar hero and kept getting interrupted.

but ya if you gave it a good amount of time to cool down, and it's still doing the same thing, you'll need a new clutch at the very least, and if you warped your flywheel, obviously you'll need a new on of those too.

way to go newb. who does burnouts anymore...

korax123 10-21-2008 08:10 AM

You can get the flywheel machined if it's not warped to bad.
And like everyone said you fried your clutch.

So Fly 10-21-2008 06:43 PM

x12423 - Its you clutch
Check out ClubRSX.com, you can get a good stock replacement one from their shop, or even go for a stage 1

Slow_HX 10-21-2008 09:26 PM

This is what happens when you race integras and lose to them :)

h-vtec 10-22-2008 01:32 AM

while ur at it find a good price for tires at this rate your gonna need em :-P

THE ONE 10-22-2008 03:12 PM

I can't believe this was a real post. Lolz

josh 10-22-2008 03:12 PM

ouch

CTRGirl 10-22-2008 04:37 PM

Treat your car a little better in the future. :idiot:

josh 10-22-2008 05:14 PM

or he should bitch if things break when he does stupid things

vtecthis 10-22-2008 05:43 PM

i got a act lightend flywheel and act 6 puck spung clutch and pressure plate for 606 off ebay and is great pain in the ass to install though

Jh4Dc5 10-22-2008 06:55 PM

Only Integra that ever beat me was on the botle and your just mad your shit is slow and every morning you leave your house to go to school you look across the street and see my car parked in the drive way and say " dam why can't I have that Ride I hate my car especialy the automatic transmision" :upyours:

Jh4Dc5 10-22-2008 07:08 PM

No one is bitching about it.. it was a mistake, mistakes happen ask your parents.

Jh4Dc5 10-22-2008 07:13 PM

In the future if you don't have nothing to say, just move on!

EPthree04 10-22-2008 07:17 PM

original poster aka Jh4Dc5 = idiot. you shouldnt even be aloud around a car

Jh4Dc5 10-22-2008 09:07 PM

I don't know and I don't care who you are, just stay out of my post

bryans_k20 10-22-2008 09:23 PM

Just get a new k24 bottom end with a new clutch, car will be even more fun to drive and you will no longer need your e-brake to burn out. lol

Umm, but yah I got a clutchmasters light weight flywheel and exedy three puck sprung with hd pressure plate off of k20a.org. Best clutch I have ever used IMO.

DeeDub 10-22-2008 11:13 PM

I have a oem clutch with like 5k miles one it, pm me if your interested in it

FranktheTank 10-22-2008 11:29 PM

Not a good selling point man!

EPthree04 10-23-2008 03:16 PM

close your thread if you dont want people to call you a dee de dee :hithead:

Ryan 10-23-2008 08:59 PM

I have Tages OEM K24 TSX clutch with 12k miles on it and not one sign of hot spots. I have the fly wheel too. Should work great in an RSX, is that whats in your avatar?

that one guy 10-23-2008 09:02 PM

05 type s.. if i remember right.


All times are GMT -7. The time now is 06:43 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021