GSR problems
 

I have a 95 eg with gsr swap and when I'm driving if I push down on the gas to much it sputters and the only problem I could think of is might be my brake booster and master cylinder because I could see a leek coming from where they meet together let me know what u think thanks.

How does it idle?

It idles fine

Check tps voltage and plugs and wires.

I did change plugs and wires how can I check tps

booster and mc will not cause the engine to sputter such as that

what ecu are you running?

oem honda distributor, plugs and wires?

Don't really know what ecu

Sorry but what is a dizzy?

Not sure if serious or.......

But its slang for distributor.

Ok thanks do u know how I can test it

any cel light on and is it obd1 or obd2

95 would be obd1 :autored:

yes it is.. but you never know they may have a ob2 swap..

which would still be run by an obd1 ecu :2cool:

Correct. Possibly be why the car is not running correctly.

Thats news.... ive run obd0 and obd2 shit in obd1 never had an issue

Don't know but the motor came out of a 98 acura gsr

do you have any misfires, check which ecu you running, and make your your using 91 octane gasoliine cus 87 unlead gas wil make cause bogging.

No misfire it just sputters when I want to punch the gas

when you press the gas pedal does it sputter all the time or intermittent

Do you have a check engine light?!

Someone needs to go help you...

It just does it when I punch it all the time but when I just drive normal it drives fine

No check engine light

Now does it work when you click the key on?

Yes

Pull the distrubitor cap off and check to make sure the little screw that holds the rotor in place hasn't came loose. Sometimes that screw will loosen and can cause this issue. Just a thought.

Ok thanks I'll check it out