s2000 offsets!
 

anyone know how low of an offset will fit on the ap1.. cuz im thinking about doin a 48+ on the front and 45+ in the rear

i think thats high for s2k

This might help,

thanks gt30r that site really helped out..

damnit joe.. u freakin noob... haha jk mang..

gonna do those 5Zeigen Sport Engines LX9000 18x7.5 48+ in the front and 18x8.0 45+ in the rear

those offsets are ok im running +45 front and rear.

roll your fenders and you can roll even a little lower but 45 is about the lowest you should safely go.

hey with those offsets r u on stock suspension or did u lower ur ride? and do u get mad camber or dose it look straight?

it also depends on what widths your running that makes all the diff.
im running 17x8 17x9 +45 allround regamasters... i just adjusted my camber. to a -3.5 in the rear with 225 tires fr and 255 rr

18x7.5 48+ in the front and 18x8.0 45+ in the rear i was thinking about running these

I have full coilovers and lowered about 2" over stock. its all about rolling the fenders and getting the camber right ron's -3 might be a little too extreme if you go with my set up as he is running lowering springs and they tend to be too soft and will cause the infamous rolling burnout effect when hitting bumps and stuff. If i were you i would make sure to get some stiff coilovers and then i would roll stock specs in the front and -1.5 /-2 (at most) in the rear with that sizing of couse roll the fenders as well.

thanks... well i was just goin to rock my stock suspension first for a while.. n then when i decided to do full coilover imma do the JICs

Atta girl. I knew you were loving my JIC FLTA2's Holla at a playa!!! :tits::tits::tits::tits:

haha... that of the TEIN.. cuz the EDFC is money :tits::tits::tits::tits::tits::tits::tits::tits:

Tein is F*CKING WHACK!!! Huge customer service issues and warranty issues. TEIN FTL, have not met many people happy with them. :whatever:

dosent JICs make something similar to the EDFC?

No sir, Tein = EDFC, Cusco = Eprom, Tanabe = IONO a new electronic system LOL

lemme get the rims first ill worrie about that later!

ur gay!!!!.....

Fuck U