hondata s200 help
 

I have a big problem with my hondata s200. The 4 wire connector that goes from the ecu to the s200 blue box has come apart. So the end that normally plugs into the blue box the wires simply just fell off the connector????? So I need to know the color code as to which wire gos where? Also if anyone can tell me a good way to get the little metal clips out of the connector so I can re soldier them I am all ears. Thanks for any help you can give me.

So far I think it looks like
_________
| ? | Black |
-----------
| ? | ? |
----------

I should have some of these cables new in stock.. They are pretty cheap too..

whats the number? i need one too also is the dyno tune for the s200 a package deal or is the hours on top of it?

hondata s200 help
 

So I have searched and searched and searched and I still do not understand. I read the sticky thread about ECUs and hondata and I’m even more confused than ever....

Here is my situation... I currently have a k20z1 in my hatch with just a PRC ecu. I seized my motor and it is toast so a k24a2 is going in its place in a few days.

I also plan on buying kpro in the next few days but what do I need just to drive my car? I am under the impression I need a PRB ecu in order to get kpro? But what’s with my PRC ecu, Can I just use the PRC for a few days?

And what’s with this Dual adapter harness?

Ive also read about imobilizers? Do I need to worry about that too?

Maybe I’m over analyzing this but can someone please just help me understand what I will need with the new k24a2 in it?

Dyno tuning is flat rate for Hondata systems, as I own the dyno, so no other fees are added..

We can put K-Pro into the PRC ecu, no need to buy another ecu. The K-pro allows us to defeat the immobilizer as well, no worries. :)

The Dual adapter harness is not for your car, so don't worry about that either.

If your car already ran with the K20Z1, drop in the K24A2, we can put K-Pro into the ecu and load a basemap until you are ready for tuning.