AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   Paint & Body Shop (http://www.azht.net/forum/forumdisplay.php?f=109)
-   -   Engine bay question (http://www.azht.net/forum/showthread.php?t=195955)

Mingus_Dew 02-05-2014 11:18 AM

Engine bay question
 
Ima be repainting my engine bay just want to know what type of sand paper to us and where to get good paint also might need some info on wire tucking thx


Sent from my iPhone using Tapatalk

king06 02-05-2014 03:22 PM

Im going through this right now. Well, mostly building my own harness.
The advise I can give you is, search. If you need to ask what sand paper you need to use, you should probably leave it to a pro. Not to discourage you from doing it, but you know.

As far as building my own harness, I just got a bunch of oem manuals that are free online. I've never done one before, so I just cut all the clips off, extended the wires and soldered everything to the ecu main clips. If you have an odb2 its should be ten times easier. Im doing it on a crx with obd1 harness and also cutting everything I don't need from the engine harness and main cabin harness.
headlights and corners are super easy, like five wires oer side including dual horns.
If you can't find the manuals I can email them to you or post them on here?
Or? Just give RC a call and get it done right the first time.

Mingus_Dew 02-05-2014 04:00 PM

My lights are done already and it's 0bd1 that ima try to do in my ef. Just wanna learn how to do it myself but if you can post them on here that will help thx


Sent from my iPhone using Tapatalk


All times are GMT -7. The time now is 03:50 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021