Any fabricators left on here?
I need a fabricator to convert and level some 350z seat rails to work in my s13. If you can actually do that let me know please. Future fab. Is backed up and I would like to get it done asap. Thanks
Sent from my SM-G900V using Tapatalk |
We was looking for a fab guy too, found like four guys. But when it came down to actually get the project going, EVERYONE was too busy.
|
Yeah, that's how it is going for me too. Everyone is like atleast a month wait...
Sent from my SM-G900V using Tapatalk |
only fab guy i can recommend in the metro area that gets shit done when he says he will .... trust me ive used most of them
|
I called him. A month wait time before he can start. If I can't find anyone sooner then I will wait for him.
Sent from my SM-G900V using Tapatalk |
Yup, feeling sucks balls. Friend decided to safe and buy a tig. Well see how that goes.
|
try calling JDL
|
Rule #1 when dealing with fabricators.... Never pay more than just for materials upfront
|
What are u wanting done?
Mike |
inbeforereadingisfundamental
|
I forgot how funny the people on
here were |
I need the mounting tabs on the rails of my s13 seats removed and on the 350z seats removed. Have the mounting tabs from the s13 seats measured and mounted onto the 350z seats and the left side of the driverside Z seat leveled cause its won't sit flush when tabs are just mounted to the seats.
Sent from my SM-G900V using Tapatalk |
Sounds like all you need is a wire feeder, a cutting wheel, and a tape measure.
|
Pretty much except for the left side of the drive seat needs to be leveled out with some metal to extend the brackets.
Sent from my SM-G900V using Tapatalk |
so ur putting 350z seats in ur s13? or did I not read correctly again?
|
Yessir. I want 350z cloth non airbag seats in my s13.
Sent from my SM-G900V using Tapatalk |
sorry never replied back. u still need this done?
mike |
Yessir I do. Alot of people are busy with car show stuff...
|
Now that my fab work has finished up call Aaron over at TSR he has a fabricator who will be able to do what you need. Just ask Aaron if Nick is available to do some seat rails for you. He did my entire roll cage, window net, parachute, seat rail for my Kirkey Seat and just finished up my Manifold and dump tube setup.
|
u wanna do it tonight?
mike |
The car and seats are at my work in mesa.......
Sent from my SM-G900V using Tapatalk |
well it was worth a shot
mike |
All times are GMT -7. The time now is 01:57 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021