AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   Welding and Fabrication (http://www.azht.net/forum/forumdisplay.php?f=161)
-   -   What is the easiest way to get these headers to work on my gsr. (http://www.azht.net/forum/showthread.php?t=185204)

Jdm-H22 01-17-2013 12:38 PM

What is the easiest way to get these headers to work on my gsr.
 
1 Attachment(s)
The header will bolt to the block but the mounts are different then the mount that is on the cat. Any easy way to get this to work?

DB8GS-R 01-17-2013 12:43 PM

Cut and weld...any exhaust place can do it for cheap

cbaracing 01-17-2013 12:55 PM

get the proper header for your application

all_motor_mike 01-17-2013 06:25 PM


^^^ this^^^


mike

juniorej1 01-17-2013 06:28 PM

Cut n weld

Jdm-H22 01-17-2013 06:48 PM

It is the right header the cat mount just don't line up the way it should

S!K TEG 01-17-2013 08:10 PM

all b-series header are interchangable, but the cat flang are placed different. any shop will do it.

Jdm-H22 01-17-2013 08:49 PM

Alright thanks guys

AZTEG95 01-17-2013 10:30 PM

cut and weld.
^
rotate

Nachooooosupreme 01-17-2013 10:39 PM

The flange bro.

Dead Bird 01-18-2013 12:42 PM

lol and that makes them interchangeable?

S!K TEG 01-18-2013 08:14 PM


Dead Bird 01-18-2013 08:42 PM

Where are the b16's and b20's at?

S!K TEG 01-18-2013 09:00 PM

doesnt apply here. we are talking about his gsr.

if you must know, the b16 falls under the 00-01 gsr and the b20 falls under 94-01 ls, a-pipe to cat flange wise.

Jdm-H22 01-19-2013 01:09 AM

We're can I get one of then interchangeable parts at bro?

failedabortion 01-19-2013 01:37 AM

From another header...

Having the flange on the cat welded in the same position will probably be cheaper though.


All times are GMT -7. The time now is 10:52 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021