Help Me Out!!!
i recently changed my front stock civic suspension to GSR suspension...and i did the bleeding process with the car off. When the car is off the brakes feel good but When i turn on the car i hav to push the pedal more down in order for the car to stop!........should i bleed them again? or any other Suggestion? thanx.
|
yea. i cant remember but i think you need to replace the brake booster also to gsr. i had to do that on my ef9 but yet again i dont know bout the eg
|
yes you have to use the booster and master cylinder from the GS-R for max perfomance
|
i had full GSR brake set up on my eg and my current eg aswell didnt use the master cylinder and they stop at the drop of a dime.... did you bleed them in order from furtest to closest?? might want to try that and bleed the front and rear and do it while the car is fully powered (turn the key to were all the power is on) i would recomend using the proportining valve for rear disk it makes a difference you can use one from a 94-01 integra, 92-95 civic si/ex w/ rear disk, 90-93 integra, 99-00 civic si
|
All times are GMT -7. The time now is 04:14 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021