Any DIY for transmission replacement? 97 accord
 

Hi my names armando
i have a 97 ex accord vtech
i need help replacing the transmission need a diy link or something

Ever wonder why you still don't have any replies?

I can help you, if you have some mechanical experience. Is it auto or manual?

Hi Armanda
Welcome to the internet bitch

I lol'd^^^^

x2

C'mon, really?
Installation is reverse of removal.

Vtech????? Really! Vtec is only spelled out correctly on your valve cover man.

no wonder no one is on here anymore

If you have questions about vtech you're on the wrong site

Google and YouTube are your friend.

Remove tires, upper ball joints, lower ball joints, axle nut, tie rods from the knuckle, remove axles, disconnect VSS and back up light switch, remove slave cylinder, disconnect shift cables, remove the brace under the car, remove starter, undo mounts and unbolt from block. Installation is the reverse from removal.

And if you really search you can find the service manual online.

"DIY bitch" instructions right herrr ^^^

Remove the axle nuts before you jack the car up. More than likely you don't have an air gun. Also most likely you will need to remove the forks attached to the struts to get the axles out. If you have an automatic, you can't just unbolt and pull off. You will have to deal with the torque converter.