AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   EG Civic/Del Sol + DC Integra (http://www.azht.net/forum/forumdisplay.php?f=85)
-   -   D16z6 cam and crank seal install (http://www.azht.net/forum/showthread.php?t=202619)

mdizzle 11-28-2015 11:09 PM

D16z6 cam and crank seal install
 
This is probably a dumb question, but is it ok to remove the cam and crank seals with a pick and then press the new seals in using a socket after removing the sprockets? Or do I need to remove the cam and valve train? I've searched and I have seen both methods. I would prefer to go the lazy route if possible. Thanks in advance!

king06 11-29-2015 02:35 AM

As long as they go in flush and seat properly you'll be okay. Taking them out might be a pain thought.

mdizzle 12-26-2015 04:57 PM

They both came out easily. I made a press tool out of pvc, bolt, nut, and a washer for the cam seal. The crank seal was tapped in using a 33mm socket and a hammer. I hope they don't leak.


All times are GMT -7. The time now is 06:39 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021