AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   All Motor (http://www.azht.net/forum/forumdisplay.php?f=91)
-   -   Sohc upgraded Cam Q's (http://www.azht.net/forum/showthread.php?t=174823)

ED6_STOCK 07-26-2012 10:00 AM

Sohc upgraded Cam Q's
 
ok heres the deal, on my all motor sohc-v im wanting to get the crower stg 2 cam and i know i will have to upgrade my valves, retainers, n springs and get tune. Now my question is will it be a direct fit (prolly noob question)? And do i HAVE TO port n polish head along with bigger injectors?? Or just with tune will be fine?

Thanks ppl i jus wana be certain on wat i have to do. :wave1:

Chef 07-26-2012 10:11 AM

Just a personal opinion... but why wouldnt you want to do a port and pollish and such while you have the head all apart.... i believe and i may be wrong but you should not have to change injectors with a good tune it should run fine... BUT youll probly get a better range of power if they are changed im sure it effects tunability to some extent....

Colten79 07-26-2012 10:12 AM

What compression is your motor? You do not need a port&polish, it would drop right in..
Site says, all that is required is springs/retainers..

ED6_STOCK 07-26-2012 10:23 AM

Well yea if i have the extra funds why not, but if its not absolutely needed then it works on my budget.


i believe stock its 9:2:1. So far i jus got i/h/e, im, 70mm tb, fuel rail, fpr. Dnt know if compression will change cuz of that. but anyways better for me on my budget if all i need is valves, springs, retainers, n tune.

Colten79 07-26-2012 10:27 AM

Says you don't even need valves.. Just springs & retainers..
I was wondering about your comp, so I can put a little insight on the injectors question.. The stocks will be fine

PENTAGRAM_OF_EVIL 07-26-2012 10:33 AM

I say P&P the head, springs and retainers, cam and gear, and drop to a 2 layer gasket to help bring comp up.. what manifold do you have.

ED6_STOCK 07-26-2012 10:41 AM

Ok cool, better for me, Thanks man appreciate it :thumbup:

ps. which shop does best tuning for this setup?

Ah well see about the PnP, but yes i will get a cam gear and yea might do the gasket too, thanks for ur input boss :wave1: oh btw its skunk2 mani.

FranktheTank 07-26-2012 10:55 AM

whats the point of getting a cam if you compression is sub 11:1? the power gains for the price and work is going to be horrible.

C.R.A.Y. 07-26-2012 11:58 AM

You don't need to pull the head to do the springs retainers and cam. Just seems like extra money and work for maybe 10 hp if that. On top of that if you're not taking it to someone that knows what they are doing it will most likely hurt power.

This

You need compression to make use of anything aftermarket on a d if you're staying na. Stock 240cc injectors will get you through anything you can make on a d na on gasoline.

ED6_STOCK 07-26-2012 12:18 PM

Depends how things turn out i will maybe upgrade injectors 350-450cc n do the 2 layer head gasket for up compression n wat not, along with Arp head studs

C.R.A.Y. 07-26-2012 12:34 PM

Reason you want to waste money on injectors your motor would never make use of?

ED6_STOCK 07-26-2012 12:46 PM

lol if no injectors necessary fine, jus a thought. main thing right now is cam, springs, retainers n tune. should b fun

Spad3deg 04-15-2013 08:35 PM

...

Sent from my X501_USA_Cricket using Tapatalk 2

victormartinezx1 06-04-2013 08:17 PM

Take.it to import.powerhouse theyll hook you up..


All times are GMT -7. The time now is 11:58 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021