rim question.
alright guys I am ordering new wheelss soon
and have a couple questions, the rim choice is 15.7 4x100 plus 35 and 15.7 4x100 plus 42 which rim has the bigger lip?? I want a bigger lip on my rim. so lmk thanks |
+35 will more than likely have the larger lip, however; the lip still won't be "that big". if you want a lip get something thats like +15, or if you have the suspension/camber for it, get +0.
|
What wheel is it.....
|
ALL OVER it. lol.
:thumbup: |
well...
its pretty hard to answer that question without knowing what wheel it is..lol :thumbsup: |
Yup.
PS - shouldn't this be in the wheel/tire/suspension/etc area in the Tech forum? :crazy: |
regardless of the wheel, won't a lower offeset create more of a lip or have a more concave face?
|
Nope. You can get Team Dynamics wheels in 15x7 4x100 and either +35, +40, or +45 offset and they all have the same basic face and design.
|
hmm, didn't know that but, i can see them being fairly similar considering there is only a 10mm difference.
|
As Simon stated not in all cases.
10mm sometimes can play a HUGE difference in the wheel, again it would depend on the type of wheel. For the most part, that offset is too high for any kind of "lip" or concaveness, I know the TEs dont go into the concave look till about a +22. |
Concave TE's look soooo good!
|
they ar buddy club P1s.. sf style
|
I dont think you wont notice the difference in the lip in either set up. The one with the lower offset will just sit with more of the "flush" look which looks better imo.
|
so go with 35?
|
15s are small?
15's with low offsets will make it look like daytons :( |
|
|
Yes, they're OEM BMW wheels.
However, I posted it because you said this: and the whole time we were only talking about a +35 offset, which is far from low. That pic of the EK looks like (at most) a +15 offset. |
apologies - as my 'low' is like +45 :(
to the OP, 16's sure wouldn't hurt tho :) |
16s on a crx... no thank you
|
x2.. stay 15's! :tits:
|
Yeah, S2K's are waaay different. When I found out +45 was a good offset for them I was like waaaaaahhh?
|
You can push a lil more then that..of course youre going to have to pull and roll but it will look gangster :lmao:. No one does under 45 on my car and im planning on doing way lower then 45...
|
i hear they don't make low off set te's in 16's ? :(
|
thanks for help guys... im gunna order my rims next week
|
How low are you looking for? Depending on how patient you are it could happen...lol
|
enough for a concave look... but not all crazy i'm not trying to rock that -26 lol just love dipped te's
|
Well the concave look starts at about a +22, But ill ask to make sure thats something you can get in a 16x7/8.
|
that would be dope thanks! :thumbup:
|
16X7+33 is the lowest they go in 4 & 5 lug.
|
All times are GMT -7. The time now is 02:29 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021