b20 swap
Im planning a b20 swap with in the next few weeks im looking for any write ups that might be on here of a list of everything i will need its going into a 92 hatch. thanks
|
almost 30 views and no help
|
Stock integra mounts and t-bracket
Stock integra ecu Stock integra axles and half-shaft Stock integra shift linkage Your wiring harness will mostly work, but i'd get a stock integra one for simplicity All of that stuff for a 1994-2001 integra, except the ecu, that's gotta be 1994-1995, and if you're using the stock b20 injectors and alternator, you'll want an obd2 harness, so 1996-2001 for that. If you get an obd1 harness and obd1 alternator, I have the necessary wiring to utilize the stock obd2 injectors. Might need some different radiator hoses, but depends on your current setup. That's mostly it if you already have engine, trans, and clutch. |
If you decide to use your civic harness. You will need an extension for the O2 sensor, the Air intake temp sensor is a close call depending on how you route your wiring. If you have a JDM b20 you need the Integra Engine Bracket (3 bolt) to accommodate the drivers teg mount. Dead Bird hit all the main points. Rywire sells adapters if you dont want/cant obtain an integra wire harness.
What does the "swap" consist of parts wise? The more details the better info you will get. |
All times are GMT -7. The time now is 07:53 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021