Suspension, Brakes, Energy on EF hatch
|
Nice write up man.. I bet that thing stops on a dime. I drove a standard hatch with almost the exact setup and it was amazing.
|
Good write up, dont see these much on azht.... I need to swap out my bushings too, but not really looking forward to trying get those crusty bastards out.
|
if you want to upgrade the booster and mc to make it even better
90-91 civic ex 15/16ths master and booster |
honda MCs have the size stamped on em right?
|
OEM honda ones do
aftermarket ones may or may not |
nice upgrades slowly doing this to my 91 si hatch
|
sweet write im gonna definetly do this to my hatch std aswell
1 question tho do the da front knuckels share the same spline count as the ef si front knuckels? |
si yes, std no
|
cool cuz i already did the si front knuckels on it and ended up being given the whole brake system off a da a week later
just havent gotten a chance to do it yet lol thanks for the info and the inspiration!!! |
im pretty sure the DA knuckles are a little taller than the Si ones, might want to keep the Si's.
Good news is the DA brakes should bolt up to the Si knuckles. best of both worlds lol |
i thought the da had a little bigger front brakes
and i think the da knuckels are somthing like 1/4 taller than the ef |
yeah 88-91 civics have 9.5 front brakes
and da have 10.3 inch front brakes |
i was under the impression the DA brakes would still bolt on
maybe thats the 92+ ex/si |
yeah maybe but there is the 88-91 ex brakes off the sedan that are bigger dont know what size tho
|
sick setup
|
It's only 90-91 EX (no such thing as an 88 or 89 EX) and they are 10.3 as well.
The 90-91 EX master cylinder is the larger 15/16th's. |
cool good to know i knew somthing was bigger on em lol
|
re: Did you try moog bushings?
|
^looks like an ebay seller from nigeria wroite that. I wasn't away moog made poly bushings for my application. I have moog tie rods on there though
|
moog doesn't make poly bushings.
that is most def spam. |
they actually do, as i sell them at my work :)
they just aren't mainstream. regardless, that is spam. |
pics of poly moog bushings!
i was under the impression they only sold hard rubber replacement bushings. |
They honestly look just like Energy stuff. I'll see if I can remember to snap a shot at work next time. I know we have Poly Sway Bar links from moog along with misc swaybar frame bushings.
|
yeah it's ok i was just fucking with you ravi, i googled it :)
|
Nice work guns!!
|
op did you have to do an alignment after you did the knuckle swap?
any pulling to one side or anything like that? |
All times are GMT -7. The time now is 09:36 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021