Need some advise on DD B20v build!!!!
Whats going on AZHT members,
I am going to be building a b20v B16 head DAILY DRIVER here in the next couple months. This will be my first full build and i just have a couple questions for you guys. I plan on running a N/A build and im looking to see at least 250WHP, I know im gonna have to build the motor, pistons,valves,cams,springs and retainers, so on and so forth, i would like to have it tuned on 91 pump gas do not wanna have to run on E85, With that being said i know i probably shouldnt go higher then 11,5:1 correct me if i am wrong.? Now what would you guys recommend piston wise i was doing some reading and saw that RS pistons are good and they are a cast metal appose to the silicone pistons. Just would like to have some input on the build like i said this is gonna be my first full on MOTOR BUILD, What are the best and most reliable pistons for this aplication Cams? Valves? Should i do high comp valves? Leave valves the same size as stock? Springs? Should i mill the head a mm or 2? have heard a lot about P2V clearance Will stock 1.8L Ls rods work with this setup? i read that the ls rods are lightweight and can handle up words to 400hp? I know a lot of people on here have done this successfully and would just like to hear some of your opinions and what you guys have done. I really appreciate all the input i get on this and need as much info you guys can offer. Thanks a lot AZHT!! :drive: :you rock: |
250whp???
|
Sounds like you want someone to spoon feed you info. Do more research before attempting this please
|
If you are looking for tech advice join Honda-Tech. They have tons of tech help, builds, and a lot of guys who know what they are talking about. I have actually seen a few B-Series NA builds in the drag racing section on HT with 300 plus WHP builds in the past few weeks.
AZHT is a for sale website.. |
should take 30-50hp out of your goal to make it realistic
|
I have been doing research that's all I have been doing.
Don't really need someone to build my car for me just looking for people That have done the same type of build and looking for some input, that's all |
B series
Ls /b20block Sleeved 86mm 14+ comp Grp rods 4piston racing ported head Big cams Good header Itbs or good manifold 250 should be easy with that. |
I have the bissi v2 prototype header and crane cams stage 3 all motor if you need some where to start :-)
Boosted1987 Integra Weekend warrior-2011 SS Under construction- LAUSANNE GREEN PEARL RHD DA |
I realize that 250 is pretty high.
I'm think about doing 84.5mm rs high comp pistons With shot peened Ls rod. What do you guys think about skunk2 valve train and maybe s2 cams? Appreciate all the input guys |
This sounds like a sneaky wtb thread
|
No def not looking to buy right now (BROKE)
|
Ls rods with arp rod bolts will be fine
Skunk pro 1s are decent. Youll make 215-225sh with that setup |
What crank will you be using?
|
Ls rods.... I'd hope an ls crank.
|
Damn you. I wanted to see if he said gsr/b16
|
Gotta love it when your looking for advise and people wanna make fun of you!!!
Just cuz it's my first motor build doesn't mean I'm stupid guy!! |
That's one thing I was wondering are the b20 and Ls crank the same or are there differences?
And I don't have to use a Ls crank if I use Ls rods do i? |
What are your guys opinion on BC cams
|
I want to see if you actually looked into building the motor. But by you asking about match ls rods answered my question.
|
Well atleast I know that you can't get on azht without some douche being a douche.
Simple questions and have no answer cuz people like YOU don't know how to give simple answers If I wanted you smart remarks that weren't gonna help me pretty sure I wouldn't be on here! Thanks for the advise though buddy lol! I can clearly see I'll be better off doing research myself. |
go to honda tech then.
Half the people here are stupid and can't even form a sentence. The other half, like myself, are here just to insult people to keep us amused at work |
Good to know that you guys don't have anything better to do then make fun of people that need help
Good job guys pat your self on the backs. |
|
*pats myself on the back*
|
|
Around they only way to get help is show that you already looked into, but cant figure it out. Something that can be googled like what crank work with ls rods should have been done in research.
Plus, nobody comes to azht for help. They come for the wts threads or the humor. |
Close thread.
|
Pink will be pink
|
A wise old man once told me.... they are all pink in the inside.
Looks like an other person couldn't deal with azht. Looks like he wont be around anymore. |
Go through it should give you lots of ideas. It all comes down to money. |
All times are GMT -7. The time now is 05:57 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021