AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   All Motor (http://www.azht.net/forum/forumdisplay.php?f=91)
-   -   ECT Sensor broke (http://www.azht.net/forum/showthread.php?t=194159)

villarino1k 11-02-2013 01:28 PM

ECT Sensor broke
 

villarino1k 11-02-2013 01:46 PM


Fix.it.again.Tony 11-02-2013 02:35 PM

use a bolt extractor kit

it is a reverse threaded head that would bit into the broken piece and allow you to loosen it as you tighten the extractor

villarino1k 11-02-2013 03:00 PM

That's what I've been reading. I've just never had any experience with one before. I'd rather have someone who can do it instead of rrisking messing up even more. If you yourself or know anyone willing to come up and get it done, like I said I'll throw you some cash for helping.

Fix.it.again.Tony 11-02-2013 07:05 PM

It's easy man, think about screwing a screw into a piece of wood. Same concept except it's lefty tighty which loosens the broken part. YouTube a video example

villarino1k 11-02-2013 08:08 PM

So that extractor should still work with this even though it's hollow? You can see in the second pic that theirs nothing for me to really drill. I watched some youtube videos but from what I can see, how it works is it makes a new hole inside the broken bolt which is what makes it turn.

Fix.it.again.Tony 11-02-2013 10:57 PM

You don't need to drill, the reverse thread on the extractor will bite into the hollow area and should loosen it up.


All times are GMT -7. The time now is 03:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021