my y7 blew so I got a b8 cannot get it to start tho
Ek chassis with original d16y7 (obd2)
The y7 blew so I bought a motor off a friend Obd1 d15b8 I pulled the y7 this mornibg and dropped the new motor in along with: Y7 dizzy Y7 alternator Y7 engine harness Y7 obd2 ecu Cranks but won't start. No spark what could be the problem? |
You forgot the oil pump. Crank trigger sensor? I think that's what its called.
|
Without it it won't start? Am I right by using the y7 ecu or jumper harness to the obd1 b8 one?
|
Mine did... start with what check engine lights you have.
|
well the distributor should not have fit and there is more items on the obd2 engine that the obd1 engine does not have
you should be getting some sort of check engine light :) |
It'll star but it will run like shit, just by pass it.
|
Dizzy fit right in holes lined up and everything I'm getting no spark though thats what throws me off I've read about bypassing ta few sensors but what I read all said that the car will start but just run like shit unless the sensors are bypassed mine just cranks doesn't start
|
so when you say no start, have you checked for fuel/spark and compression? check those first than cont to diagnose
also make sure timing is correct |
No spark bro
|
That's why im wondering if I don't bypass these sensors will they hinder me getting spark to the distributor or is this a totally nonrelated issue
|
totally unrelated issue and the coil or ignitor could have conked out in the distributor :)
|
it would still run. well atleast my integra did, do you not have any codes coming through?
also timing being off would cause no spark, ask me how i know |
I thought you had to have it. Learn sometthwnew errrday.
|
Do you have piston/ plug wires matched up properly?
Check firing sequence. |
firing sequence is correct i just went to import powerhouse and they told me the crank sensor is only for emission purposes should only throw a cell code dizzy was working perfect can anyone help me with a wiring diagram
|
just wondering if you HAVE CHECKED TIMING
|
i could have told you that and sure the distributor was working but shit happens sometimes
what is a wiring diagram going to do for you? does your check engine light cycle on and off before you start the car? does it stay off when cranking the car? |
Faulty alarm car is up and running thank you guys for all the help :) can't wait to get her back on the road
|
So what happened? Details would be great for future issues people have
|
Looks like his alarm was acting up?
|
All times are GMT -7. The time now is 09:03 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021