get rid of that damn single cam and you won't have that problem

I thought k series were v6s

just picked up a tranny

^ slap yo self!

Deadbird I need mounts and a trans and I'll be b series but no moneyz

someone help!

Put in new to me seats, vacuumed the carpet, trying decide if I want to order the $40 non ac heater ducking or just remove the heater core and plug up the firewall.

Whats the part number for that ac delete cover thing? ^^

The heater duct? number 7 in the diagram part # 79810-SR3-A01



Ac firewall plug, other two I believe are for the fuse box firewall plug and diverside firewall plug.
91631-SR3-000 PLUG, AIR CONDITIONER HOLE $6.35 $6.35 91610-SF4-003 PLUG, HOLE (36X65) $5.67 $5.67 90621-SE0-000 PLUG, HOOD HOLE $3.00 $3.00

This thread should have lots of info

Why don't you just pull the ac stuff out of the stock ducting?

me? Not enough room...fuse box is under there, battery and amp are going under there next

should throw in some a2:biggrin: pistons well your at it dead bird lol it would be the time to raise the power bar a lill bit.:drive:

It would be way more cost effective to buy a running k20a3 or k24a1/a4 longbock.

Laid new parts next to it to rub against

your TB don't need coolant lines...its AZ....

Your IACV don't need it either..........FUK IT!!


Just cap off everything at the waterneck/intake mani....only run the 2 heater core lines.......the 2 bigger lines....

Will look cleaner carnal....

nott sure if sarcasm is at play since you said I dont need to cool the tb & iacv but then said it's az?

aaaand I'm taking out the heater and blower lol

They don't cool the tb or intake...

ok well then what is Joser talking about? and would you like to enlighten me with what they cool?

they warm up the throttle body and iacv

LOL epic fail on my part...I'll cap them then, thanks for clearing that up fellas.

I also read on some Honda tech thread that I should use the z6 gasket for the z6 intake mani? Is this right?

More cleaning under the hood, re-running hanesses to clean up the engine bay and getting ready for the plethora of parts I ordered to come in and be installed :biggrin:

^^ troll?? EG?? what about race car??

<----confused...

No lol that's a different guy with a very similar s/n, he posted a thread asking about transmissions and I was like WTF???

HAHA, yeah guys, sorry for the confusion, you'll get the hang of it eventually :biggrin:

^^ hmmm

WTF, change your screen name?!?!?

He has a few "legit" threads, but yeah changing names would be simple if you PM a mod.....

I can do that, like I said, I didn't know a main user had the same name. I don't normally make it a point to research forums before I sign up LOL

Didn't see this, thanks for the links man.


Today I sorta cleaned up the trans and bolted it up to the long block, not sure if I'll be tucking the eng. Harness ...probably later on lol :sleep:

Rudy y photos wey??? no manches......

And so you won't talk shit, I'll post some of my projects tontie.....

I have so many pictures of all this bs lol, but it's nothing shiny or fancy so eeehhh


anyone need a z6 intake mani? I have an extra I'd sell for cheap...