y8 0bd2b wire harness help!
 

Obd2b SI harness
Obd2b EX ecu p2p
I know i will either have to re wire the 10 pin to my 8 pin distributor or buy the adapter from rywire.
Basically everything about this car is obd2b d16y8 besides the harness. Will it work fine with my P2P ecu? Any other changes i need to make? I do have the 8 pin plug already if I am able to re wire somehow. (a diagram of some sort would be much help) Thanks!
Attachment 76851

Anyone know wtf i am talking about?

this site is not much of a tech forum but to answer your question.

Looks like someone had an obd1 dizzy on that harness maybe?

what color wire are on that 2 wire plug?

just because your car is a basket case doesnt mean there isnt tech on this forum :crazy:

nope. obd2b have a small 8pin plug like that :yummy:

sell car, its ruined

OP the cut wires on your harness are not the distributor wires

the cut wires are
vtec pressure blue black and black
vtec solenoid is green yellow
ect is red white and green black

please dont buy that distributor plug for 20 on ebay

Went on to honda-tech and had people post tech stuff to help. Needlesd to say, Figured out my problem.

:bunny2:

Thx...too late on the plug purchase and I still have no clue where my distributor plug is on the harness... the only other cut wires are a pair of green and black..

Ok i have made a great discovery just now. This harness i have is indeed obd2b but is an SI harness. So i could still cut and splice the wires to make my own 10 pin to 8 pin distributor plug right? And will this harness work fine with the P2P ecu i have? any other concerns i should have?