Bumper conversion help
 

Looking to swap out my 2010 civic sedan vp bumper for a 09-10 si bumper.
Any parts i need aside from grill and bumper
Do i nee any different clips also?

Looked around in 8th gen site but all i saw was 08-10 coversion, no 10' to 10' base to si coversions

message effective he should have you covered

Here is a couple parts links so you can compare part numbers for teh different parts.

This one is set to a 10 4dr DX (VP) 5spd. Bumpers.



10 4dr Si.Bumpers.



From what I find the bumper, is actually the same.

Grills. 10 DX (VP)



10 Si Grill.



Quick look, same grill, different molding surround.

You will need to get some factory style fog/driving lamps as the Si's came stock with them that year.




Hope that gets ya started and on your way.

So the grill and fog lights are the only difference? Can i just remove my factory plastic where the fogs go?

Sorry but I'm not doing all the leg work. I only looked at a couple parts. Please notice they were just the major parts you named in the 1st post. I never said that was the complete list of parts.

I posted what I did so YOU can do some looking into it, the same as I would have to do. Please notice the links already set to a 2010 DX (VP) 4dr and the other a 2010 Si 4dr.

As for fog's/driving lamps, in 2010 the Si's came standard with them from the factory I know. All other 2010's, (DX, LX, EX), they were an accessory item from the dealer. So yes, I do know that would be needed to complete the look your going for.

Again, hope that gets ya started and on your way. Best of luck with the project.