idk what is up with my firing order
 

In an 94-95 integra gsr the firing order should be 1-3-2-4 4-3-2-1 and my car won't start at all if I put it to that order it just pops and stuff. But if I put my firing order to the b16 order it fires but runs badly and I have a b18c1 but idk if the distributor was changed for a b16 or what is going on anyone know what's up with this?

Firing order is 1-3-4-2. I don't know where you got your information from, but readjust your firing order accordingly and all will run smootly.

just tried that and it still was popping without starting

Well be sure you have it right (double check). I have a 94 GSR and have no issues with that firing order lol.

Make sure your starting at the bottom left when facing the cap, and working clockwise

3 4
1 2

----------------> front of the car

As viewed from the passenger side.

1 is the cylinder closest to driver side, 4 is closest to passenger.

Double check!

this is what i found

so in the picture should it be
3 4
1 2

Just do it exactly how I put it.

3 4
1 2

-------------> front of car, viewed from passenger side.

The cylinder layout is correct.

looks like ravi is bored

haha nope, thats not my motor, i just did a lil search for the n00b!