AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   Do It Yourself (http://www.azht.net/forum/forumdisplay.php?f=144)
-   -   Anybody got DIY headliner?? (http://www.azht.net/forum/showthread.php?t=108778)

drhonda09 09-28-2009 08:11 PM

Anybody got DIY headliner??
 
I've been looking into wrapping my headliner with a different material.. I dont really like the look of shiny vinyl.. any ideas on what fabric style to use?? post pics of headliners you think look pretty sweet!! I wanna get some ideas.. TIA :wave1:

azjared 09-28-2009 08:41 PM

good spray adhesive (dont cheap out on this item)
fabric of choice
remove headliner
slowly work your way across with a credit card or similar item to smooth the fabric
i do this in sections at a time
i like to leave a little overhang and fold it over and glue to top for more support.
re install.

very easy just take your time

ill post a picture of mine in suede later when im at home

auex 09-28-2009 10:06 PM

I did the headliner in my old civic in an automotive type suede. It looked awesome. Didn't take to long to do. The only problem is doing the visors, if you know someone who can sew it would look great. I think I still have enough material left to do another one. I have light grey color. I am not sure if I still have pics of it though, I'll look. Over all it was pretty easy and realtively cheap to do. Just a little time.

gsr1379 09-28-2009 10:33 PM

What is a good glue to use? I used some Loctite spray adhesive and my headliner fell down in the back

this is what i used and the heat made the glue soft



so i need to know what is better

Jason.AZ1 09-28-2009 10:49 PM


azjared 09-28-2009 10:55 PM

thats mine thanks jason, gma sewed those visors

nyenye09 09-29-2009 10:46 AM

i wanna do this too! hahaha

rushbuster70 10-01-2009 08:28 PM

use 3m 90 adhesive spray...holds up for ages....

who did those visors?I need mine done!!!!

anthonyb 10-02-2009 03:10 AM

Where can you buy suede for automotive ?

Oilpan 10-03-2009 10:33 AM

Just go to joans fabric store, i did mine in black velvet.

turbo4dr 10-03-2009 10:39 AM

x2, how did you guys do the visors? Did you guys sew them up?

Jstylez 10-03-2009 01:45 PM

nice man, looks fresh! now pop off that plastic rear view mirror cover, and paint it a flat/matte/satin black to match! ;)

azjared 10-05-2009 04:30 PM

ya i should do that too lazy though lol

die in a dick fire noob 10-06-2009 06:38 AM

i just did mine with black suede, it was tiny robots before... i'm doing the sun visors now, trace them inside out, pin them, sew them, then leave one side open, hand stich that one and voila, you have sun visors... pretty simple if you know how to sew.

tanman 10-18-2009 10:53 PM


BigCountry 10-19-2009 11:12 AM

Suede headliner = pure sex..... I must do this to my hatch.

tanman 10-19-2009 11:30 AM

Its really easy. I used 3m 90 spray. but let it cure a day or two to hold good or keep it in the shade. my friend didnt do that and his is sagging bad.

mtaz 10-23-2009 02:25 AM

x2 i used 2 cans, but that was for my xj, but they're about $10/can
x2
the fabric is pretty cheap, but overall it's pretty simple. just make sure you let the adhesive dry once you get the fabric on or else it won't hold obviously. i think i let mine set for about 3 hours or so (just cuz i was tight on time) in the garage. it was about 6 months ago and i have yet to see it sag. gl hope this helps

fRoSt 10-23-2009 04:10 AM

sorry to ask but would 3m 90 adhesive work for those plastic rear quarter trimming if planning to go with some suede? sorry again if i'm asking in ur thread bro.

tanman 10-23-2009 07:19 AM

Yes it will. I covered my a pillars with suede and it worked.

LiLinsane 10-23-2009 11:51 AM

its a huge Areosol spray can, kinda resembles grandma's hairspray can she would use back in the 50's.

lol its great stuff, used it to glue some tweed on my panels for my camaro.
the dogs got a hold of one of my wrapped parts., its all chewed to hell.

BUT! the tweed is still glued on!

So 3M Fabric Adhesive is Rottweiller Approved!

fRoSt 10-23-2009 01:38 PM

kool. u guys are great man. thx

MrRline2010 10-23-2009 04:03 PM

is the 3m spray like a spray paint can or is it something you gotta use a gun for?

Sprmario 10-23-2009 04:24 PM

i have to redo mine, make sure what ever fabric you get that it isnt too heavy or it will sag. other than that it just takes a lil time and patience. hardest part is taking if off your car.

mtaz 10-23-2009 06:55 PM

its just like a spray paint can

Bottlefedb20 10-24-2009 10:02 AM

I used Wilsonart industrial spray adhesive with a compressor and gun........Ive tried many different adhesives in a spray can, and havent had good luck with the results. IMO:grin:

Random Names From Hell 10-31-2009 01:44 AM

good thread thanks for the info im gonna test on my dodge then perfect it on the hatch

suavecito_64 01-20-2010 07:22 PM

ha ha nice:goodjob::bananalama::thumbup::grin:

dwa_colt45 01-20-2010 07:28 PM

Don't skimp on the adhesive for sure...
It works good on the plactic on the pillers too I did all mine I don't really have a good pic of it...
If anyone does they can post it...
I did my sunroof as well but that's a paaaain in the ass for sure

Jason.AZ1 01-20-2010 07:31 PM



All times are GMT -7. The time now is 02:46 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021