subframe reinforce when using 23mm itr sway
do i need to use some sort of subframe reinforcment when using the 23mm itr front/rear sway on my 01 dc2, is it optional will i really need it? let me know thanks, Greg
|
Its optional, but I would recommend it because the frame could get torn. If it was me I definately get it.
|
usdm and jdm itr front swaybar is 24mm
usdm rear swaybar is 22mm jdm rear swaybar is 23mm ^ you need subframe reinforcement for both of these. Something as simple as the BSQ kit will be fine ($20 shippped, can't beat that). |
thanks good lookin out fellas
|
depending on your spring rates you might need a stronger sub reinforce kit.
|
so the bsq is good enough or not?
|
ive been running th BSQ kit for two years now. no problems at all
|
i said "depending on your spring rates" so what are they!?!?!? tires too>? dan |
x2
but im running the puny 22 |
All times are GMT -7. The time now is 01:13 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021