know hows? eg rear lip install plzzzzzzzzzzzzz
 

i got a rear lip for my eg hatch i know how to do the front just the 2 screws n in the middle but my rear has the 2 corners screws n then has 3 bolts n nuts idk what to do with the bolts n nuts! it has indention's along the top of the lips if anyone knows what to do that would help thanks n maybe a write up on how to do my front tow hook from the grill area thxxxx :biggrin:

You may have to drill new holes for it

For the front tow hook you remove your bumper then drill out 2 holes in the reinforcement bar in the spot where you want your hook to be and align it well so the tow hook isn't crooked.

For the rear lip, you may have to use rivets in the middle along the bottom of the lip and then just the 4 screws (2 on each side) on the bumper where the mudflaps should screw in. The screws for the lip should be screwed in first and then screw in the other screws for the muflaps (if you have any).


Hope this helps.

I just drilled out new holes on the bumper .. shit works just fine.