AZHT.net - FAB shop recommendation

AZHT.net (http://www.azht.net/forum/index.php)

- Welding and Fabrication (http://www.azht.net/forum/forumdisplay.php?f=161)

- - FAB shop recommendation (http://www.azht.net/forum/showthread.php?t=158911)

FAB shop recommendation

I have a 99 Crown Victoria. It needs some frame repair/fab work. Last owner majorly f'ed up this car, but it is what it is and now I need to fix it. I don't have an actual picture till later today but the attached is a general idea of what I need done. So on with it....

Passenger side trailing arm mounts to a point on the rear end, then travels forward and bolts to a bracket on the outside of the frame rail.(like the picture) My problem is that the mount on the frame is completely gone and the arm is just bolted through the frame where the bracket should be. This obviously is no good as the arm is supposed to pivot during spring compression.(think if that bracket was gone in the pic)

I originally contacted Kyle Green who does pre-runner fab and things like that. He quoted me $150 when he looked at the car. This was a while ago and I have tried getting into contact with him again recently and have not been able to.

So the question is.....Where do I go?? This needs to be fixed asap and I am really looking for a good recommendation for something like this rather than just "trust" someone to do it right. Any help is appreciated. Thank you.

i dont understand how its bolted in with nothing there. can you take a pic of how it is now?

Mr.Burner also know as Kyle
U.S. Customz
auto & fab

Boost Junkyz in glendale

1 602.421.1504

Look up Future Fabrication. They do a lot of cage and chassis fabrication and have years of experience.

Thank you for all the opinions, much appreciated.

I'd get Aaron Garcia to do it, he likes working on oddball shit. :)

Isnt this aaron? Fuck i get so confused

Yes, that is Aaron, my bad, I figured this was right up his vtec alley.

lol thats messed up ^

150 sounds like a fair price from the email pics you sent me. I mostly weld aluminum and some stainless. Gl with your repair.

Again, thank you for all the opinions. I ended up at Future Fab. Jon does AMAZING work and i will for sure be going to him from now on. I'll post up pics in the next day or so.