ok, i've been trying to find the torque specs in the interwebs for the b16 torque down specs, as im typing, because we are putting back together a b16a. i need the torque down specs for the main caps, rod caps and everything that involves putting the block back together. I've found a few links but they are not for b16, this shit sucks


this one of MANY links alike i found

then



so im guessing i will not find them because nobody wants to be held accountable if something goes wrong with their engine after putting back together and it fails.


bottom line, i think there should be a link or some info that, according to the manual, it has all the torque down specs for every single engine honda made.
or maybe im not looking for it in the wrong place, fawk

also found this that i though it was very good info

I have a quick question... are all the head gaskets all the same through the generations? I just put a 99 Civic Si head gasket on my JDM b16a1 and it was fine for a couple of days... now its leaking everywhere... =(

Any B16 head gasket will work.
Good luck with your rebuild.

For once this info actually helped me with something. Found out I have stock jdm gsr cams... boo i must go hang myself now.