ls vtec
 

so i got a b16 head and a ls block how hard is the install and if i was to have it dun at a shop what kind of cost would i be looking at.
:thumbup:

do it yourself it'll be cheeper and you'll learn alot more. but make sure you have someone there to help you out. there i a thread on here that has my ls vtec build check it out (my buddy jays ls vtec build) well something like that it doesnt say too much but im sure it might help along the way.but anyways gl to your build weather you do it or someone else! post pix when its done!

do it your self theres not much too it check honda-tech.com theres a couple how to's on ls/vtec build's ive done quit a few myself if you were in tucson or closer to me i'd help ya out but phx is too far :( gl :thumbup:

heres the link

cool you guys rock. i will post pics when i start.

its not dat hard u just gota cover up 1 port on da head and have a oil feeding line dat goes on da head , , , , no drilling

make sure u get the golden eagle lsvtec kit it makes the install alot easier

thats not all there is too it if your going for a half ass build then do this if you want to do it right the first time theres more too it

Yeah there's alot to it.
But get low on the build man.
Just like said above.
read a few How to Ls Vtec threads and get the golden eagle kit.

You'll be set.

its so easy!when i did my first lsvtec it only takes me like 8 hours!

you need a lot of stuff but at the end, its worth it

the best write up ever on doing ls-vtec. if u follow that step by step u will have an amazing motor.

I just read that pretty good details

Easy man slap them together and use some Jb weld it will be tight jk lol.