D16z6 valve tick.
I've been building a z6 for a while. Went a few routes, or should say I had a few dreams, but it's just a stock NA build with 75.5mm pistons.
Right now my only issue I've run into is a nasty valve tick, seems to be exhaust side of cylinders 1,2, and 4. Cylinder 3 seems to be quiet. I've adjusted the valve lash multiple times and I believe I have done it to spec... 1-3-4-2 turning the crank counterclockwise so the rotor turns clockwise. This is correct right? I believe the first time I did it, I turned the crank clockwise. Other than that the engine runs smooth, no oil burning or anything like that. Does anyone have some input on what it could be? |
Here's a link to a video |
I've done the valve lash to specs. Still not getting anywhere.
|
All times are GMT -7. The time now is 05:43 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021