AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   Welding and Fabrication (http://www.azht.net/forum/forumdisplay.php?f=161)
-   -   Any fabricators left on here? (http://www.azht.net/forum/showthread.php?t=200210)

taintschwacker 01-14-2015 11:17 AM

Any fabricators left on here?
 
I need a fabricator to convert and level some 350z seat rails to work in my s13. If you can actually do that let me know please. Future fab. Is backed up and I would like to get it done asap. Thanks

Sent from my SM-G900V using Tapatalk

king06 01-14-2015 01:01 PM

We was looking for a fab guy too, found like four guys. But when it came down to actually get the project going, EVERYONE was too busy.

taintschwacker 01-14-2015 02:15 PM

Yeah, that's how it is going for me too. Everyone is like atleast a month wait...

Sent from my SM-G900V using Tapatalk

C.R.A.Y. 01-14-2015 02:18 PM

only fab guy i can recommend in the metro area that gets shit done when he says he will .... trust me ive used most of them


taintschwacker 01-14-2015 02:36 PM

I called him. A month wait time before he can start. If I can't find anyone sooner then I will wait for him.

Sent from my SM-G900V using Tapatalk

king06 01-14-2015 04:05 PM

Yup, feeling sucks balls. Friend decided to safe and buy a tig. Well see how that goes.

Jason.AZ1 01-14-2015 06:07 PM

try calling JDL

C.R.A.Y. 01-15-2015 07:14 AM

Rule #1 when dealing with fabricators.... Never pay more than just for materials upfront

all_motor_mike 01-15-2015 08:07 PM

What are u wanting done?



Mike

CAPTAIN CAAAAAAAVEMAN 01-15-2015 08:20 PM

inbeforereadingisfundamental

all_motor_mike 01-15-2015 08:41 PM

I forgot how funny the people on
here were

taintschwacker 01-15-2015 11:05 PM

I need the mounting tabs on the rails of my s13 seats removed and on the 350z seats removed. Have the mounting tabs from the s13 seats measured and mounted onto the 350z seats and the left side of the driverside Z seat leveled cause its won't sit flush when tabs are just mounted to the seats.

Sent from my SM-G900V using Tapatalk

Koopa Troopa 01-15-2015 11:42 PM

Sounds like all you need is a wire feeder, a cutting wheel, and a tape measure.

taintschwacker 01-16-2015 09:56 AM

Pretty much except for the left side of the drive seat needs to be leveled out with some metal to extend the brackets.

Sent from my SM-G900V using Tapatalk

all_motor_mike 01-16-2015 12:16 PM

so ur putting 350z seats in ur s13? or did I not read correctly again?

taintschwacker 01-16-2015 10:26 PM

Yessir. I want 350z cloth non airbag seats in my s13.

Sent from my SM-G900V using Tapatalk

all_motor_mike 01-25-2015 11:46 AM

sorry never replied back. u still need this done?


mike

taintschwacker 01-25-2015 12:41 PM

Yessir I do. Alot of people are busy with car show stuff...

AZ_CIVIC 01-25-2015 02:00 PM

Now that my fab work has finished up call Aaron over at TSR he has a fabricator who will be able to do what you need. Just ask Aaron if Nick is available to do some seat rails for you. He did my entire roll cage, window net, parachute, seat rail for my Kirkey Seat and just finished up my Manifold and dump tube setup.

all_motor_mike 01-25-2015 03:54 PM

u wanna do it tonight?


mike

taintschwacker 01-25-2015 04:58 PM

The car and seats are at my work in mesa.......

Sent from my SM-G900V using Tapatalk

all_motor_mike 01-25-2015 05:12 PM

well it was worth a shot


mike


All times are GMT -7. The time now is 07:25 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021