View Single Post
Old 06-26-2014, 09:41 PM   #1
HondaFisher
 
Join Date: Feb 2013
Location: Arizona
Posts: 75
iTrader: (1)
D16z6 valve tick.

I've been building a z6 for a while. Went a few routes, or should say I had a few dreams, but it's just a stock NA build with 75.5mm pistons.

Right now my only issue I've run into is a nasty valve tick, seems to be exhaust side of cylinders 1,2, and 4. Cylinder 3 seems to be quiet.

I've adjusted the valve lash multiple times and I believe I have done it to spec...
1-3-4-2 turning the crank counterclockwise so the rotor turns clockwise.
This is correct right?

I believe the first time I did it, I turned the crank clockwise.

Other than that the engine runs smooth, no oil burning or anything like that.

Does anyone have some input on what it could be?
__________________
FISH AZ, I DO ><>
http://www.youtube.com/user/HondaFisher
LONG LIVE THE SOHC
HondaFisher is offline   Reply With Quote