AZHT.net  

Go Back   AZHT.net > Model Specific Tech Forums > S2000 & NSX

S2000 & NSX S2000 & NSX Discussion

Reply
 
Thread Tools Display Modes
Old 06-17-2007, 08:54 PM   #1
s2k owner
Sponsored by RMS Dist.
 
s2k owner's Avatar
 
Join Date: Feb 2007
Location: glendale,az
Posts: 7
iTrader: (0)
pricing for install on cams springs & retainers

yeah i am looking for some prices on installing stage 2 cams, valve springs and retainers and an apexi neo and tuning. i also have a throttle body and a fuel preesure regulator that i can install myself. i just have the proper tools to install the head stuff. i am looking to get this done asap. so the sooner the better. i would also prefer a local shop to do the work. so just pm me with prices thanks.
s2k owner is offline   Reply With Quote
Old 06-17-2007, 09:47 PM   #2
gt30r
 
Join Date: Sep 2006
Location: phoenix
Posts: 85
iTrader: (0)
Quote:
Originally Posted by s2k owner View Post
yeah i am looking for some prices on installing stage 2 cams, valve springs and retainers and an apexi neo and tuning. i also have a throttle body and a fuel preesure regulator that i can install myself. i just have the proper tools to install the head stuff. i am looking to get this done asap. so the sooner the better. i would also prefer a local shop to do the work. so just pm me with prices thanks.
What are stage 2 cams?
gt30r is offline   Reply With Quote
Old 06-18-2007, 09:12 AM   #3
s2k owner
Sponsored by RMS Dist.
 
s2k owner's Avatar
 
Join Date: Feb 2007
Location: glendale,az
Posts: 7
iTrader: (0)
they are skunk2 stage 2 cams. its just a more aggressive cam.
s2k owner is offline   Reply With Quote
Old 06-18-2007, 08:35 PM   #4
K20 PWR
K > B, H, D
 
K20 PWR's Avatar
 
Join Date: Oct 2006
Location: A house :-)
Posts: 715
iTrader: (17)
good luck. hopefully you get good results
__________________
K20 PWR is offline   Reply With Quote
Old 06-18-2007, 08:55 PM   #5
gt30r
 
Join Date: Sep 2006
Location: phoenix
Posts: 85
iTrader: (0)
No company has came out with decent cams for the s2k yet, Brian Crower put his out on the market with no R/D, (no power gains) everyone on that group buy returned them to the vendor. Last i heard about Skunk they were in R/D. I would talk to Tony at UMS
gt30r is offline   Reply With Quote
Old 06-18-2007, 09:15 PM   #6
s2k owner
Sponsored by RMS Dist.
 
s2k owner's Avatar
 
Join Date: Feb 2007
Location: glendale,az
Posts: 7
iTrader: (0)
i have a buddy that has in his car and he says a world of difference
s2k owner is offline   Reply With Quote
Old 06-18-2007, 11:02 PM   #7
gt30r
 
Join Date: Sep 2006
Location: phoenix
Posts: 85
iTrader: (0)
Quote:
Originally Posted by s2k owner View Post
i have a buddy that has in his car and he says a world of difference
Any dyno #s or hp gains ?
gt30r is offline   Reply With Quote
Old 06-19-2007, 08:49 AM   #8
jdmish_roots
FRANKENBERRIES!
 
jdmish_roots's Avatar
 
Join Date: Mar 2006
Location: In devs arms
Posts: 831
iTrader: (3)
hey pm big c and ask him if james can do it... tell him i sent you
__________________
I|C|B| Motorsports
MUGEN|SPOON|BUDDY CLUB|J'S RACING
jdmish_roots is offline   Reply With Quote
Old 06-19-2007, 09:26 AM   #9
tokyospeedpros
 
tokyospeedpros's Avatar
 
Join Date: Mar 2006
Location: Gilbert, AZ
Posts: 710
iTrader: (14)
we can help

We can help on this, we even have the TODA tool for F20c, F22c and K series valve train. Hit me up and Ill help you out.

Btw fellow S2K owner here
tokyospeedpros is offline   Reply With Quote
Old 06-21-2007, 04:52 PM   #10
RMS-DIST
 
Join Date: Jun 2007
Location: phoenix
Posts: 574
iTrader: (4)
Quote:
Originally Posted by s2k owner View Post
yeah i am looking for some prices on installing stage 2 cams, valve springs and retainers and an apexi neo and tuning. i also have a throttle body and a fuel preesure regulator that i can install myself. i just have the proper tools to install the head stuff. i am looking to get this done asap. so the sooner the better. i would also prefer a local shop to do the work. so just pm me with prices thanks.

dirty slut you
RMS-DIST is offline   Reply With Quote
Old 06-21-2007, 05:01 PM   #11
taggart_lumpy
AZHT.net Administrator
 
taggart_lumpy's Avatar
 
Join Date: Mar 2006
Location: NOMAD
Posts: 22,622
iTrader: (48)
see you on monday buddy
__________________
NOMAD INDUSTRIES
07 FFL

taggart_lumpy is offline   Reply With Quote
Old 06-21-2007, 08:55 PM   #12
RMS-DIST
 
Join Date: Jun 2007
Location: phoenix
Posts: 574
iTrader: (4)
Quote:
Originally Posted by taggart_lumpy View Post
see you on monday buddy
see you on tuesday slut
RMS-DIST is offline   Reply With Quote
Old 06-25-2007, 12:00 AM   #13
Phillie
 
Phillie's Avatar
 
Join Date: Jan 2007
Location: Phoenix
Posts: 1,799
iTrader: (11)
Quote:
Originally Posted by gt30r View Post
No company has came out with decent cams for the s2k yet, Brian Crower put his out on the market with no R/D, (no power gains) everyone on that group buy returned them to the vendor.
Thats the same I heard.
Phillie is offline   Reply With Quote
Old 06-26-2007, 07:45 PM   #14
gt30r
 
Join Date: Sep 2006
Location: phoenix
Posts: 85
iTrader: (0)
Any update on these cams? Installed, tuned, dyno #s, hp gains
gt30r is offline   Reply With Quote
Old 06-26-2007, 10:27 PM   #15
s2k owner
Sponsored by RMS Dist.
 
s2k owner's Avatar
 
Join Date: Feb 2007
Location: glendale,az
Posts: 7
iTrader: (0)
no not yet but they should be installed by this weekend so ill be at speedworld this weekend.
s2k owner is offline   Reply With Quote
Old 07-02-2007, 07:07 PM   #16
9k All The WAY
 
9k All The WAY's Avatar
 
Join Date: Aug 2006
Location: North Phoenix, AZ
Posts: 792
iTrader: (0)
Good luck buddy!!!
__________________
Turbo lag was invented so V8's could catch up...
9k All The WAY is offline   Reply With Quote
Old 07-02-2007, 08:23 PM   #17
gt30r
 
Join Date: Sep 2006
Location: phoenix
Posts: 85
iTrader: (0)
Quote:
Originally Posted by s2k owner View Post
no not yet but they should be installed by this weekend so ill be at speedworld this weekend.
Are you going to have it tuned & dyno? Good luck, my car probably won't be ready till after summer
gt30r is offline   Reply With Quote
Old 07-09-2007, 11:01 PM   #18
gt30r
 
Join Date: Sep 2006
Location: phoenix
Posts: 85
iTrader: (0)
Quote:
Originally Posted by s2k owner View Post
no not yet but they should be installed by this weekend so ill be at speedworld this weekend.
Any #'s on these cams yet ?
gt30r is offline   Reply With Quote
Old 07-11-2007, 11:36 AM   #19
allmotorgsr
NA is Best!
 
allmotorgsr's Avatar
 
Join Date: Dec 2006
Location: Tucson
Posts: 107
iTrader: (0)
interested to hear results
keep us posted man
__________________
1968 Firebird Built 400 Small block- Sold (V8's suck lol)
1995 DC2 NA w/ boltons- Sold
2000 GSXR 1000- New Toy
1991 CRX- Drag car..... someday
allmotorgsr is offline   Reply With Quote
Old 07-21-2007, 10:20 PM   #20
gt30r
 
Join Date: Sep 2006
Location: phoenix
Posts: 85
iTrader: (0)
Any #s on these cams ?
gt30r is offline   Reply With Quote
Old 07-22-2007, 08:15 AM   #21
s2k owner
Sponsored by RMS Dist.
 
s2k owner's Avatar
 
Join Date: Feb 2007
Location: glendale,az
Posts: 7
iTrader: (0)
yea i installed them and had it dynoed in cali but cant remember the name of the place. the results were that they put down an extra 34hp and like 28 torque all the way to 10k. but i am selling them now bc my father is buying me the rev hard turbo kit. so if anybody is interested in buying them. pm me price is $450. thanks
__________________
Sponsored by: RMS-DISTRIBUTING
7150 W. ROOSEVELT
UNIT C-103 PHX, AZ
85043 623-742-9494
s2k owner is offline   Reply With Quote
Old 07-22-2007, 06:40 PM   #22
gt30r
 
Join Date: Sep 2006
Location: phoenix
Posts: 85
iTrader: (0)
Post the dyno sheet
gt30r is offline   Reply With Quote
Old 08-01-2007, 05:48 PM   #23
vtec4dr
~G~
 
vtec4dr's Avatar
 
Join Date: Mar 2006
Posts: 283
iTrader: (7)
There is no way a set of cams gave 34 horsepower on a car that is almost perfect from the factory. The only way possible is if your cam timing was BAD before and with the new cams the fixed it but i highly doubt that.

The only person i know locally that had his CAMS installed in an S2000 had them installed at a local shop not saying who, but messed the cam timing up so bad the car dyno'ed 100HP ( i hope this wasnt your car) so as we speak the car is being fixed bye another shop locally, once again not saying who. Once this car is done ill post up numbers as im waiting to to hear cause i want cams myself but untill i see DYNO numbers in stone i wont buy something that doesnt produce. Ill keep you posted.

I want to see your DYNO showing 34 HP gain!!
__________________
Jesus drove a Honda, he just didn't talk about it. John 12:49 NIV - "For I did not speak of my own accord..."
vtec4dr is offline   Reply With Quote
Old 08-03-2007, 04:59 PM   #24
pch
 
pch's Avatar
 
Join Date: Mar 2006
Location: Goodyear
Posts: 1,210
iTrader: (0)
Quote:
Originally Posted by vtec4dr View Post
There is no way a set of cams gave 34 horsepower on a car that is almost perfect from the factory. The only way possible is if your cam timing was BAD before and with the new cams the fixed it but i highly doubt that.

The only person i know locally that had his CAMS installed in an S2000 had them installed at a local shop not saying who, but messed the cam timing up so bad the car dyno'ed 100HP ( i hope this wasnt your car) so as we speak the car is being fixed bye another shop locally, once again not saying who. Once this car is done ill post up numbers as im waiting to to hear cause i want cams myself but untill i see DYNO numbers in stone i wont buy something that doesnt produce. Ill keep you posted.

I want to see your DYNO showing 34 HP gain!!
yeah, i have seen this car you are refering about too. After the install the guy put down 132 to the wheels, now that he actually has the stock cams in and got his car dynoed he hit 202whp and i forget the torque
pch is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2018
Design by HTWoRKS