AZHT.net  

Go Back   AZHT.net > Model Specific Tech Forums > EG Civic/Del Sol + DC Integra

EG Civic/Del Sol + DC Integra Civic (92-95), Del Sol (93-97) and Integra (94-01) Discussion

Reply
 
Thread Tools Display Modes
Old 11-28-2015, 11:09 PM   #1
mdizzle
 
mdizzle's Avatar
 
Join Date: Jun 2008
Location: gilbert
Posts: 105
iTrader: (0)
D16z6 cam and crank seal install

This is probably a dumb question, but is it ok to remove the cam and crank seals with a pick and then press the new seals in using a socket after removing the sprockets? Or do I need to remove the cam and valve train? I've searched and I have seen both methods. I would prefer to go the lazy route if possible. Thanks in advance!
__________________
1992 Civic Si paperweight
2007 Mercury Grand Marquis
2003 Jeep Wrangler Rubicon
2014 Jeep Wrangler Rubicon Unlimited
mdizzle is offline   Reply With Quote
Old 11-29-2015, 02:35 AM   #2
king06
SOY JUAN CAMANEY,CHINGON!
 
king06's Avatar
 
Join Date: Feb 2009
Location: Glendale
Posts: 6,109
iTrader: (14)
As long as they go in flush and seat properly you'll be okay. Taking them out might be a pain thought.
king06 is offline   Reply With Quote
Old 12-26-2015, 04:57 PM   #3
mdizzle
 
mdizzle's Avatar
 
Join Date: Jun 2008
Location: gilbert
Posts: 105
iTrader: (0)
They both came out easily. I made a press tool out of pvc, bolt, nut, and a washer for the cam seal. The crank seal was tapped in using a 33mm socket and a hammer. I hope they don't leak.
__________________
1992 Civic Si paperweight
2007 Mercury Grand Marquis
2003 Jeep Wrangler Rubicon
2014 Jeep Wrangler Rubicon Unlimited
mdizzle is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2018
Design by HTWoRKS