AZHT.net  

Go Back   AZHT.net > Technical Forums > Tech Garage > Welding and Fabrication

Reply
 
Thread Tools Display Modes
Old 12-26-2012, 08:24 AM   #361
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
ha! all those pics and u bring up the gay wing lol


mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-09-2013, 01:32 AM   #362
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
just did this 3" down pipe for a gt40r powered 2nd gen. also took his hks hyper mid section and cut out all the 2.25" piping till where it opens up to 3" right before the back half joint. from that point forward i did 3" stainless all the way to the down pipe.












































mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-11-2013, 10:11 AM   #363
disfunctionalEF
 
disfunctionalEF's Avatar
 
Join Date: Aug 2007
Location: Dry Heat
Posts: 513
iTrader: (2)
Beautiful welds on that downpipe, Mike!
__________________
Like Mayhem Metal Werkz on Facebook!
http://www.facebook.com/MayhemMetalWerkz
Or
Check out our Fab thread!
http://www.azht.net/forum/showthread.php?t=172061
disfunctionalEF is offline   Reply With Quote
Old 01-11-2013, 05:03 PM   #364
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
why thank u sir.


mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-17-2013, 12:34 AM   #365
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
added 4 wideband ports to this skunk header for a local..... dont know if the bungs were cast or what but as soon as it would heat up to add rod it would melt away..... hence the not so stellar welds =S










mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-17-2013, 10:23 AM   #366
KingDingaLing
AZHT.net Moderator
 
KingDingaLing's Avatar
 
Join Date: Mar 2006
Location: p-town az
Posts: 7,004,157
iTrader: (65)
why 4 wide band bungs? makes no sense to me? can someone clarify? why not just 4 egt sensors.
__________________
RCsGarage
HASPORT Performance
JDL Auto Design
VIBRANT Performance
|I|C|B|Motorsport
ALL IN Fabrication
HYBRID Racing
FALKENtire
DOWNSTARINC.
STICKYDILJOE.COM
KingDingaLing is offline   Reply With Quote
Old 01-17-2013, 10:50 AM   #367
C.R.A.Y.
ravi speaks in 3rd person
 
C.R.A.Y.'s Avatar
 
Join Date: Jun 2007
Location: Phoenix
Posts: 8,418
iTrader: (31)
Quote:
Originally Posted by KingDingaLing View Post
why 4 wide band bungs? makes no sense to me? can someone clarify? why not just 4 egt sensors.
Individual cylinder trims for itbs
__________________
Modern Performance and Tuning
We wont leave a rag in your motor

Brand tuning is under achieving
#torquedtospecmainssquad
C.R.A.Y. is offline   Reply With Quote
Old 01-17-2013, 11:37 AM   #368
Jason.AZ1
 
Jason.AZ1's Avatar
 
Join Date: Jul 2007
Location: PHX
Posts: 18,140
iTrader: (33)
__________________
HoodRich
Jason.AZ1 is offline   Reply With Quote
Old 01-17-2013, 12:09 PM   #369
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
Quote:
Originally Posted by C.R.A.Y. View Post
Individual cylinder trims for itbs
this is why^^^.... ill put pics of the itb's up when im done with them.


mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-20-2013, 06:37 PM   #370
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
just finished some street/strip porting on an srt4 head.....
































mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-20-2013, 10:38 PM   #371
J240sx
 
Join Date: Mar 2007
Location: Lehigh Acres, FL
Posts: 183
iTrader: (0)
Hey, never got a reply on that charge pipe.
J240sx is offline   Reply With Quote
Old 01-21-2013, 11:59 AM   #372
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
just finished this collector that going to be part of t4 topmount mani im making for a nissan sentra s-er......

























mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-21-2013, 12:08 PM   #373
C.R.A.Y.
ravi speaks in 3rd person
 
C.R.A.Y.'s Avatar
 
Join Date: Jun 2007
Location: Phoenix
Posts: 8,418
iTrader: (31)
ball out
__________________
Modern Performance and Tuning
We wont leave a rag in your motor

Brand tuning is under achieving
#torquedtospecmainssquad
C.R.A.Y. is offline   Reply With Quote
Old 01-21-2013, 02:08 PM   #374
RICK's-TOWING
Rick Made
 
RICK's-TOWING's Avatar
 
Join Date: May 2006
Location: Ozarks Missoura
Posts: 1,296
iTrader: (0)
Good lord that collector looks awesome! How long does it take you to get it like that?
__________________
first 9 sec. pass
9.55 @ 147mph in mannys car

like us on facebook! IMMACULATE FABRICATION
http://www.facebook.com/pages/Immacu...66444050125487
RICK's-TOWING is offline   Reply With Quote
Old 01-21-2013, 03:33 PM   #375
honduh_head
I am el Jefe
 
honduh_head's Avatar
 
Join Date: Mar 2006
Location: Peoria
Posts: 23,308
iTrader: (1)
Quote:
Originally Posted by RICK's-TOWING View Post
Good lord that collector looks awesome! How long does it take you to get it like that?
i second that! looks amazing!
__________________
flickr
Nikon Mafia
Quote:
Originally Posted by 1 point 6 View Post
Most Honda kids spend money they dont have, to buy things they dont need, to impress people on the internet they dont like.
honduh_head is offline   Reply With Quote
Old 01-21-2013, 05:33 PM   #376
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
thank u sirs.

it actually took longer then i thought it would..... the porting i did it this morning and it took just under 2 hours. i still need to add the wastegate port once i figure out where its going to go. there goes another hours of clean up or so.


mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-21-2013, 06:36 PM   #377
RICK's-TOWING
Rick Made
 
RICK's-TOWING's Avatar
 
Join Date: May 2006
Location: Ozarks Missoura
Posts: 1,296
iTrader: (0)
I was gonna say. Cause i too ported a collector today. And I spent a good 30-45 min on it. I looks good. But not that good. Hahaha
__________________
first 9 sec. pass
9.55 @ 147mph in mannys car

like us on facebook! IMMACULATE FABRICATION
http://www.facebook.com/pages/Immacu...66444050125487
RICK's-TOWING is offline   Reply With Quote
Old 01-25-2013, 03:22 PM   #378
honduh_head
I am el Jefe
 
honduh_head's Avatar
 
Join Date: Mar 2006
Location: Peoria
Posts: 23,308
iTrader: (1)
ya fuck all that haha... looks great mike but no way could i do that on a daily basis. i touch up all the rough spots (usually from air hammer) and high points, bling up the flange a little and send it on its way. its all gonna rust and tarnish any way lol.
__________________
flickr
Nikon Mafia
Quote:
Originally Posted by 1 point 6 View Post
Most Honda kids spend money they dont have, to buy things they dont need, to impress people on the internet they dont like.
honduh_head is offline   Reply With Quote
Old 01-26-2013, 12:10 AM   #379
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
Quote:
Originally Posted by Rock_Steady View Post
ya fuck all that haha... looks great mike but no way could i do that on a daily basis. i touch up all the rough spots (usually from air hammer) and high points, bling up the flange a little and send it on its way. its all gonna rust and tarnish any way lol.
thank u my good man..... thats the good thing abut me..... i dont do this full time so it doesnt really get old u know. i like to really get into the attention to detail as much as i can. i try to go above an beyond what the rest of the guys do (if im able to that is) to make mine that much more appealing.


mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 01-27-2013, 05:49 PM   #380
xracerx
In it 2 Win it!!!
 
xracerx's Avatar
 
Join Date: Jul 2008
Location: Staging lanes
Posts: 1,292
iTrader: (2)
Nice work your doing sir. May have to hit you up on some intake piping work and some exhaust fab work for a 95' coupe.
__________________
"Dont let the pretty face fool you"
95-EJ- EXPERIMENTAL built
Ls/v -12.83 @ 106 1.7 60ft IFO Fontana 2015
xracerx is offline   Reply With Quote
Old 01-29-2013, 12:44 AM   #381
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
Quote:
Originally Posted by xracerx View Post
Nice work your doing sir. May have to hit you up on some intake piping work and some exhaust fab work for a 95' coupe.

thank u sir, just shoot me a pm if u need something.


mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 02-10-2013, 01:11 AM   #382
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
ported some subie heads.... heres a quick few shots, ill put better ones up tomorrow.....












mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 02-11-2013, 01:09 PM   #383
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
ok heres the full spread on the subie heads......

overall shots.....











inlets of intake ports.....











close ups of intake ports.....






combo chamber side view of intake port short side radius....




combo chamber side view of intake bowls from different angles.....










and a close op on the intake port throat area.....




straight exhaust port....










dog leg exhaust port......








combo chamber side view of straight exhaust port short side turn....



cloe up of exhaust port throat.....




different angles of straight exhaust bowls.....








different angles of dog leg exhaust bowls.....








long side view of exhaust bowl....




above view of combo chambers......




mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 02-20-2013, 11:20 AM   #384
KingDingaLing
AZHT.net Moderator
 
KingDingaLing's Avatar
 
Join Date: Mar 2006
Location: p-town az
Posts: 7,004,157
iTrader: (65)
Quote:
Originally Posted by RC'sGarage View Post
If I ever need a head ported your going to be my first call. NICE WORK!!!!
um who the fuck are you?
__________________
RCsGarage
HASPORT Performance
JDL Auto Design
VIBRANT Performance
|I|C|B|Motorsport
ALL IN Fabrication
HYBRID Racing
FALKENtire
DOWNSTARINC.
STICKYDILJOE.COM
KingDingaLing is offline   Reply With Quote
Old 02-20-2013, 12:09 PM   #385
Streeter
 
Streeter's Avatar
 
Join Date: Apr 2008
Location: Tucson
Posts: 736
iTrader: (5)
Quote:
Originally Posted by KingDingaLing View Post
um who the fuck are you?
^lol
__________________
Quote:
Originally Posted by taintsmacker View Post
It looks like you showed up at school as much as u showed up for the race you illiterate fuck
Streeter is offline   Reply With Quote
Old 02-20-2013, 07:19 PM   #386
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
Quote:
Originally Posted by KingDingaLing View Post
um who the fuck are you?
lol, when was that posted in here?


mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 04-04-2013, 10:49 PM   #387
quikRS
 
quikRS's Avatar
 
Join Date: Mar 2006
Posts: 72
iTrader: (4)
very nice work.. teach me how to weld (seriously)
quikRS is offline   Reply With Quote
Old 04-22-2013, 03:09 AM   #388
all_motor_mike
 
all_motor_mike's Avatar
 
Join Date: Jun 2010
Location: Surprise, AZ
Posts: 516
iTrader: (1)
been busy but i finally gt around to getting some more pics up. heres my buddies 01 mustang gt i just did 3" stainless down pipes and exhaust for..... they are hellion manifolds btw. i also did the really technical boost piping lol. im to lazy to put them in any kind of orer so here a bunch of pics of it.....
























































mike
__________________
im not gay but my car is......
all_motor_mike is offline   Reply With Quote
Old 04-22-2013, 05:24 AM   #389
chicken bandit
 
chicken bandit's Avatar
 
Join Date: May 2011
Location: phoenix
Posts: 1,081
iTrader: (1)
^^^ that shit looks serious
chicken bandit is offline   Reply With Quote
Old 04-22-2013, 08:06 AM   #390
Jason.AZ1
 
Jason.AZ1's Avatar
 
Join Date: Jul 2007
Location: PHX
Posts: 18,140
iTrader: (33)
Looks good
__________________
HoodRich
Jason.AZ1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2018
Design by HTWoRKS