AZHT.net  

Go Back   AZHT.net > Technical Forums > Tech Garage > General Tech Forum

General Tech Forum Discuss engine misc tech, transmissions, fabrication and tools.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-20-2012, 04:49 PM   #1
LS-S DA9
http://www.azht.net
 
LS-S DA9's Avatar
 
Join Date: Jul 2007
Location: the valley
Posts: 9,827
iTrader: (38)
Clutch Master Cylinder HELP!

so my 1995 integra Gs-r (DB8) had a leaky clutch master cylinder.. i replaced it with a 1995 civic Si (eg hatch) master cylinder and im still having problems.

Too much play at the top or it catches right at the top, it varies.. i bled it and bled it. the pedal adjustment is as far out (at the tip of the threads) as i can go and my clutch is still good.(competition stage 4, 6 puck still grabs great.)

i also checked the entire lines all the way to the slave and found no leaks or wet spots.
new reservoir and hose

is the master leaking again since its been sitting for about 2 years?
do EG reservoirs not work for DCs?

real help or if i can get someone with real experience to check it out for a few bucks (if they fix the issue)
__________________

2001 Integra LS project/DD
2005 CR-V fully loaded


Hasport
kSPORT
ASR
HONDATA
LS-S DA9 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2013
Design by HTWoRKS