You think your car is clean? i think not! 56k NO WAY!

Jermo537 · 07-20-2011, 03:19 PM

Saw a few ads where people get paid to take a rag to a car and say its clean, which baffles me...Here is a few cars i have done in the past...ill let the pics speak for themselves....

2002 RSX
BEFORE

AFTER

1996 Civic
BEFORE

AFTER

2001 Integra
BEFORE

AFTER

[u][b]2000 Civic SI[\u]
BEFORE[b]

AFTER

1995 Civic
BEFORE

AFTER

2001 Nissan Frontier ( NO BEFORE PICS =( )

1996 Integra
BEFORE

AFTER

My Moms DISGUSTING ASS Probe

rudsone · 07-20-2011, 03:23 PM

Jermo537 · 07-20-2011, 03:26 PM

Quote:

Originally Posted by rudsone

dragCartel · 07-20-2011, 03:27 PM

^^^ lmao^^^^

to the op bad ass fucking details man... props!! how much do u charge for something like that???

**The God Damn Batman** · 07-20-2011, 03:31 PM

Look good.

On the last integra.. You wrote "After" twice. Just fyi.

rudsone · 07-20-2011, 03:31 PM

all jokes aside, what do you use to clean the seats and carpet?

95integra · 07-20-2011, 03:31 PM

how much for a 96 f-350 crew cab? manly underhood and body wash wax/detail?

Fresh_manny21 · 07-20-2011, 03:34 PM

Looks good I need my car done

Mighty Max · 07-20-2011, 03:34 PM

Great job!

Do you handle all years and models? I might have something a bit older for you to work on.
If you could PM me your rates and what all you do exterior wise as well I'd appreciate it.

24/7VTEC!!!! · 07-20-2011, 03:42 PM

post some fucking tits! lol

i need this done in my expedition.

bb4arson · 07-20-2011, 03:45 PM

how much for a brand new 2011 out of the showroom civic versa twin turbo rotary piston .

builtem1 · 07-20-2011, 03:49 PM

so are you the best car wash guy on azht..? id have to say nice work

Jermo537 · 07-20-2011, 04:16 PM

Quote:

Originally Posted by dragCartel

^^^ lmao^^^^

to the op bad ass fucking details man... props!! how much do u charge for something like that???

thanks mayne! its rough work so i try my best...i really dont know what to charge people because so much time is involved and plus you have to drop your car off to me for a day and not a lotta people can do without their car for a full day...

Quote:

Originally Posted by 08MZ3

Look good.
On the last integra.. You wrote "After" twice. Just fyi.

DOH! fixed

Quote:

Originally Posted by rudsone

all jokes aside, what do you use to clean the seats and carpet?

i use a power washer and simple green. i also use a shop vac after i power wash the interior, helps them dry faster because they take so damn long to dry...

Quote:

Originally Posted by 95integra

how much for a 96 f-350 crew cab? manly underhood and body wash wax/detail?

well this thread was kinda to show what ive done, not really say hey anyone want this done? ya know? im down to do the interior of your f350, engine bay and put a good power wash and scrub on the outside but i dont have the tools do to do a good wax job...

Quote:

Originally Posted by Fresh_manny21

Looks good I need my car done

You are first if the price is right!

Quote:

Originally Posted by Mighty Max

Great job!

Do you handle all years and models? I might have something a bit older for you to work on.
If you could PM me your rates and what all you do exterior wise as well I'd appreciate it.

Thank you sir! i can pretty much handle anything...interior isnt too hard to get out, just tough to get it out without breaking shit. but thats what the internet is for =) i really dont know what to charge honestly as this wasnt a business ad or something. im definitely down to do anybodys interior but the price is always a problem, not too many people realize what all is involved and arent willing to pay much at all for it =(

Quote:

Originally Posted by 24/7VTEC!!!!

post some fucking tits! lol
i need this done in my expedition.

is the price is right maybe we could git er dun!

Quote:

Originally Posted by bb4arson

how much for a brand new 2011 out of the showroom civic versa twin turbo rotary piston .

that sounds like a car i see in my dreams!

Quote:

Originally Posted by builtem1

so are you the best car wash guy on azht..? id have to say nice work

damn straight! naw i dont claim to be, just saw what junk others were posting and thought id throw in my 2 cents....and thanks for the compliments!

dragCartel · 07-20-2011, 04:19 PM

shit i have extra cars man... so pm me details about prices when you come up with a price...

6thgen · 07-20-2011, 05:53 PM

Quote:

Originally Posted by rudsone

This made me scream LOL!

But damn Jermo! Awesome fuckin work

that one guy · 07-20-2011, 06:01 PM

High-5 haha, looks good man I remember you brought that ebp si back to life. Def have a eye for detail, but dam that probe was disgusting. What kind of pressure washer are you using?

89true1 · 07-20-2011, 07:12 PM

i feel you 100%.. Everytime i detalied a car it would it would look like these pics above.... i dunno; i have fun when i do it. It always made me feel good to be in a clean car, and not some grose garbage pile.. i had a couple of before after pics too but, i got locked from my photobucket

good work

fer's_hatch · 07-20-2011, 07:19 PM

Start your own shop, u already have a bunch asking for their cars cleaned !

aznkid4now · 07-20-2011, 07:20 PM

good work! whats the best way to let the seats dry without getting the rotten smell? and best and safest method to clean up an engine bay?

mad_jdm98 · 07-20-2011, 07:37 PM

Dayum Jermo Props to you!! Nice work dude!

Jermo537 · 07-20-2011, 09:14 PM

Quote:

Originally Posted by dragCartel

shit i have extra cars man... so pm me details about prices when you come up with a price...

Pm'd

Quote:

Originally Posted by 6thgen

This made me scream LOL!
But damn Jermo! Awesome fuckin work

Thanks broski!

Quote:

Originally Posted by that one guy

High-5 haha, looks good man I remember you brought that ebp si back to life. Def have a eye for detail, but dam that probe was disgusting. What kind of pressure washer are you using?

that EBP SI was the most time consuming project i ever had. i did so much to that car and the kid that bought it blew up the motor within 4 months

Quote:

Originally Posted by 89true1

i feel you 100%.. Everytime i detalied a car it would it would look like these pics above.... i dunno; i have fun when i do it. It always made me feel good to be in a clean car, and not some grose garbage pile.. i had a couple of before after pics too but, i got locked from my photobucket

good work

yeah i have to do it to every car i get whether it will be my car or a project car. plus i feel its my duty on earth to restore all the dirty ass nasty hondas =) the RSX at the top is my current car...

Quote:

Originally Posted by fer's_hatch

Start your own shop, u already have a bunch asking for their cars cleaned !

i would if i enjoyed this stuff. i dont necessary enjoy it but i do enjoy not being a corporate 9-5 robot...if people we willing to pay decent money i might enjoy it more lol

Quote:

Originally Posted by aznkid4now

good work! whats the best way to let the seats dry without getting the rotten smell? and best and safest method to clean up an engine bay?

i've never gotten the rotten smell and what i do is hang the carpet over my gate, power wash it, shop vac it and leave it int he burning sun. power wash the seats, shop vac them and leave them in the sun. they are usually dry by like 5pm, thats if i can get everything done by noon and out drying in the sun...never had any issues power washing the engine bay. dont let the power washer SIT on the distributor is a given, if you have a K&N air filter put a bag over it and thats about it...the power washer i have is electric and is just the right strength stream, gas powered ones are ruthless and fuck shit up ive learned

Quote:

Originally Posted by mad_jdm98

Dayum Jermo Props to you!! Nice work dude!

thanks my nizzle!

aznkid4now · 07-20-2011, 09:46 PM

would the power washers at the self serve carwash be good enough or too much strength

DarkAngel · 07-20-2011, 09:47 PM

Just a question.........Why was this not in the detail section? Just wondering. Good Job though.

AZ gangsta · 07-20-2011, 09:59 PM

your work is A+++ !!!

that one da · 07-20-2011, 10:03 PM

dam good job

mad_jdm98 · 07-20-2011, 10:05 PM

Quote:

Originally Posted by aznkid4now

would the power washers at the self serve carwash be good enough or too much strength

They're fine to use on your motor and exterior.

**Atomic-Orange-Turbo-Sloth** · 07-21-2011, 12:15 AM

sowhatareyoutryingtosell?

problem ?

lol jk good job man!

Jermo537 · 07-21-2011, 12:16 AM

Quote:

Originally Posted by aznkid4now

would the power washers at the self serve carwash be good enough or too much strength

those are about the same strength as the one i have so ur good. you will just be paying out the ass so make sure you bring like 50 dollars in quarters to keep that timer going lol i used to use those all the time on my floor mats when i washed my car

Quote:

Originally Posted by DarkAngel

Just a question.........Why was this not in the detail section? Just wondering. Good Job though.

theres a detail section? i looked around and figure this was the best place for it...guess im retarded and looked right past it...owell one of the douchebag mods will move it for me, or knowing them they will close it

Quote:

Originally Posted by AZ gangsta

your work is A+++ !!!

Quote:

Originally Posted by that one da

dam good job

thanks brosefs!

Jermo537 · 07-21-2011, 12:17 AM

Quote:

Originally Posted by TheStig

sowhatareyoutryingtosell?

problem ?

lol jk good job man!

not trying to sell naaating! thats why i put it in the lounge

Bill Cosby · 07-21-2011, 05:27 AM

Damn this thread fucking took off. Looking good though, It would be cool if you offered a mobile service. Come to my house beautify my car as such... I'd pay 80-90 dollars, I think the car washes charge 60 for int shampoo and 30 for a hand wash and engine bay clean. This would be better I think

07-20-2011, 03:23 PM	#2
rudsone vibra positiva Join Date: Aug 2007 Location: la finikera Posts: 13,612 iTrader: (14)	__________________ turn this bitch up! wake up niggas! if you already awoke? sip some lean! go to sleep!

07-20-2011, 03:27 PM	#4
dragCartel 1320 all day Join Date: Dec 2010 Location: Compton, Ca. Posts: 1,059 iTrader: (5)	^^^ lmao^^^^ to the op bad ass fucking details man... props!! how much do u charge for something like that??? __________________ "Member #3 of the I Don't Ride Pauls Dick Club" LARRY MERCHANT #1 FAN

07-20-2011, 03:31 PM	#6
rudsone vibra positiva Join Date: Aug 2007 Location: la finikera Posts: 13,612 iTrader: (14)	all jokes aside, what do you use to clean the seats and carpet? __________________ turn this bitch up! wake up niggas! if you already awoke? sip some lean! go to sleep!

07-20-2011, 03:31 PM	#7
95integra Join Date: Nov 2006 Location: tucson Posts: 967 iTrader: (6)	how much for a 96 f-350 crew cab? manly underhood and body wash wax/detail? __________________ team Br0ke D1ck member #001 WTF IS A TEGGY?!

07-20-2011, 03:34 PM	#8
Fresh_manny21 Join Date: Mar 2006 Location: phx Posts: 911 iTrader: (3)	Looks good I need my car done __________________ N.O.B WWW.LoCashRacing.COM WWW.BullheadGears.com Finish-Line Racing 1,069 Whp 746 Tq Locash Tuned H having A anger T towards E everyone R reaching S success

07-20-2011, 03:31 PM	#5
The God Damn Batman Formerly: 08MZ3 Join Date: Feb 2008 Location: Gotham Posts: 5,363 iTrader: (1)	Look good. On the last integra.. You wrote "After" twice. Just fyi.

07-20-2011, 03:34 PM	#9
Mighty Max Squid Beard Join Date: Sep 2008 Location: Phoenix Posts: 239 iTrader: (0)	Great job! Do you handle all years and models? I might have something a bit older for you to work on. If you could PM me your rates and what all you do exterior wise as well I'd appreciate it. __________________ I came into this world kicking, screaming and covered in someone else's blood, I plan on leaving in the same fashion. *I tell cool stories bro.*

07-20-2011, 03:45 PM	#11
bb4arson ;) Join Date: Nov 2007 Location: vtec heaven Posts: 9,088 iTrader: (9)	how much for a brand new 2011 out of the showroom civic versa twin turbo rotary piston . __________________ non vtec 1.5 fully built . hookers headerzz, custom exhaust 2.5 inch into a 4 inch greedy exhaust . cold air intake. best 1/4 17.9 @ 83 mph you mad ?

07-20-2011, 03:49 PM	#12
builtem1 Join Date: Aug 2009 Location: tucson Posts: 2,538 iTrader: (11)	so are you the best car wash guy on azht..? id have to say nice work __________________ depending on how you mix it can be purple or pink..

07-20-2011, 04:19 PM	#14
dragCartel 1320 all day Join Date: Dec 2010 Location: Compton, Ca. Posts: 1,059 iTrader: (5)	shit i have extra cars man... so pm me details about prices when you come up with a price... __________________ "Member #3 of the I Don't Ride Pauls Dick Club" LARRY MERCHANT #1 FAN

07-20-2011, 06:01 PM	#16
that one guy Join Date: Aug 2008 Location: C.A.R.B. Posts: 4,109 iTrader: (19)	High-5 haha, looks good man I remember you brought that ebp si back to life. Def have a eye for detail, but dam that probe was disgusting. What kind of pressure washer are you using? __________________ subie <3

07-20-2011, 07:12 PM	#17
89true1 Join Date: Feb 2008 Location: In AZ. Posts: 3,596 iTrader: (6)	i feel you 100%.. Everytime i detalied a car it would it would look like these pics above.... i dunno; i have fun when i do it. It always made me feel good to be in a clean car, and not some grose garbage pile.. i had a couple of before after pics too but, i got locked from my photobucket good work

07-20-2011, 07:19 PM	#18
fer's_hatch Join Date: Jul 2009 Location: phoenix arizona Posts: 3,051 iTrader: (10)	Start your own shop, u already have a bunch asking for their cars cleaned ! __________________ JESUS > religion "I have no idols. I admire work, dedication and competence." " If you have God on your side, everything becomes clear." Ayrton Senna

07-20-2011, 07:20 PM	#19
aznkid4now Join Date: May 2008 Location: USA Posts: 1,927 iTrader: (0)	good work! whats the best way to let the seats dry without getting the rotten smell? and best and safest method to clean up an engine bay?

07-20-2011, 07:37 PM	#20
mad_jdm98 NHBP Ej6 Join Date: Aug 2010 Location: Gilbert Posts: 1,279 iTrader: (6)	Dayum Jermo Props to you!! Nice work dude!

07-20-2011, 09:46 PM	#22
aznkid4now Join Date: May 2008 Location: USA Posts: 1,927 iTrader: (0)	would the power washers at the self serve carwash be good enough or too much strength

07-20-2011, 09:47 PM	#23
DarkAngel Join Date: Mar 2006 Location: SOMEWHERE Posts: 5,769 iTrader: (29)	Just a question.........Why was this not in the detail section? Just wondering. Good Job though. __________________ " Your words are your own creation and every time you open your mouth, you show the world a glimpse into who you really are. Your words are powerful. They have the ability to create a moment and the strength to destroy it. "

07-20-2011, 09:59 PM	#24
AZ gangsta .... Join Date: Sep 2006 Location: Arizona Posts: 566 iTrader: (4)	your work is A+++ !!! __________________ I wouldn't recommend sex, drugs or insanity for everyone, but they've always worked for me

07-20-2011, 10:03 PM	#25
that one da Join Date: Jun 2009 Location: Tattoo shop Posts: 2,465 iTrader: (12)	dam good job

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode