DIY Cheap way to remove paint!

[ChoMo Van]

http://images.google.com/imgres?imgurl=http://www.328studios.com/blogstuff/paint/easyoff.jpg&imgrefurl=http://www.328studios.com/blogstuff/paint/easyoff.htm&usg=__fqIpDwTzxmenWEBwutUQ9As24zA=&h=487&w=294&sz=33&hl=en&start=12&um=1&tbnid=DFT-9bhnkfDaNM:&tbnh=129&tbnw=78&prev=/images%3Fq%3Daircraft%2Bpaint%2Bremover%26um%3D1%2 6hl%3Den%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DNhttp://images.google.com/imgres?imgurl=http://www.328studios.com/blogstuff/paint/easyoff.jpg&imgrefurl=http://www.328studios.com/blogstuff/paint/easyoff.htm&usg=__fqIpDwTzxmenWEBwutUQ9As24zA=&h=487&w=294&sz=33&hl=en&start=12&um=1&tbnid=DFT-9bhnkfDaNM:&tbnh=129&tbnw=78&prev=/images%3Fq%3Daircraft%2Bpaint%2Bremover%26um%3D1%2 6hl%3Den%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DN

[ChoMo Van]

I did it to one of my wheels...LOL it does work!
pretty much spray it on,Go inside take a couple tokes, drink a beer come back and hose it off...

[95_B18b1_Teg]

also good for cleaning the inside of intake manifold runners works like a charm

[chakaloso_02]

wow this is great.. i dont need sandpaper anymore.. lol

and my mom always has a couple of cans... hehe :devil1:

[sleepynguyen]

hmmm thats pretty cool! might look into this myself

[taggart_lumpy]

ive actually been using this recently to clean up things

[AZbabygirl]

*Really? It works? I need to re paint.... Anyone know any painters??? =) *

[jake2001z001]

AIR CRAFT remover sold at ACE, spray it on and it will eat the paint down to the bare metal by itself. Use to use this stuff on valve covers. Works wonders

[azjared]

AIR CRAFT remover sold at ACE, spray it on and it will eat the paint down to the bare metal by itself. Use to use this stuff on valve covers. Works wonders

x2 just used some the other day

[babyrex22]

wtf im buyin some tommorow lol

[Tweeder]

i kinda wanna go buy a cheap beater to try this on

[SoB NiG]

Holly crap in the video that shit came off like cake!!! Illl!

[Colten79]

So that easy-off stuff strips paint good?

[CZappettini]

would be good to spray on some cunts hood, something like CUNT, and then wash it off, funny stuff right there

[GUlP]

Aircraft remover..

[kdroberts83]

Aircraft remover is the shit, just make sure you don't get any on your skin. That shit don't care if your hands aren't painted.

[REDREX]

*Really? It works? I need to re paint.... Anyone know any painters??? =) *

i will paint it free if u buy the stuff. free u ask ? cause im still learning ive done about 4 cars just want more practice

[ICD]

Aircraft remover is the shit, just make sure you don't get any on your skin. That shit don't care if your hands aren't painted.

no fukn lie here.i see aircraft remover and my hands tingle.lesson learned:idiot:

[2fnfast]

i will paint it free if u buy the stuff. free u ask ? cause im still learning ive done about 4 cars just want more practice

im down hit me up with a pm

[92SiSpoon]

time to paint my rims.

[Rob x3]

would this work to remove chorme

[89true1]

well looks like im going to primer my car on my next day off:) good link

[dozer54321]

better than the aircraft stripper is MEK aka methyl ethyl ketone



got to work with a lot of that stuff at the FAA repair place i worked at for a while, good/slightly dangerous times :upyours:

[gamblingwithsouls]

I used this on my rims. I didn't have much luck with it, but it sure cleaned them really well.

[thakid]

Holy hell. This is crazy. Oven cleaner. Who would of guessed. Nice find

[Daddy_Digital]

AIR CRAFT remover sold at ACE, spray it on and it will eat the paint down to the bare metal by itself. Use to use this stuff on valve covers. Works wonders

will burn the hell out of ur skin if it lands on it lol

[mr.DUNK]

If you end up using aircraft stripper on your vehicles body and it goes down to bare metal. You need to etch prime the metal before you paint...this doesn not mean any primer....has to be direct to metal or etch primer. Not doing so, could result into rusting under the surfaxe of the paint or paint flaking off in the near future...FYI..

[Method520]

i just picked up aircraft remover from autozone for like 7 bucks and it works great, the can is bigger too :)

[Bottlefedb20]

Ive used oven cleaner for years to clean and strip all the oil build up off blocks!1 can and 30 minutes in the sun and all the build up just sprays off. Great on oil pans too.........

[builtem1]

iam have to try that when i strip the paint off my crx and to clean my motor i used awsome get it at a dollar store no joke it takes all the oil stans etc right off its crazy

[*inFamous*]

I guess im old school using a DA sander lol

[bb4arson]

i just picked up aircraft remover from autozone for like 7 bucks and it works great, the can is bigger too :)

x2 man thanks for letting me know where to get it i was just going to go to lowes or something ..
im going to try it on one of my valve cover in 20 min..:thumbup:

[die in a dick fire noob]

aircraft stripper is fine, but i wonder how it compares on wheel paint, factory paint on wheels (at least my bmw wheels) was a fucking bitch. shit was on there good... took almost an entire can of stripper just to kind of get it off of one wheel. now if someone has spray painted your shit yeah it works great.

[chakaloso_02]

^^^^^ true shit

i have a set of 14' basketweaves ive been trying to get the paint of for a couple of weeks now... that shit is in there, i gave up on it so fuk it, im painting over it.. lol

[bb4arson]

aircraft stripper is fine, but i wonder how it compares on wheel paint, factory paint on wheels (at least my bmw wheels) was a fucking bitch. shit was on there good... took almost an entire can of stripper just to kind of get it off of one wheel. now if someone has spray painted your shit yeah it works great.

it worked pretty good on my valve cover ..
ill try it out on some factory painted wheel see how it works just for kicks

[g2integy]

shit works great! just did my shift knob took 45 minutes.

[die in a dick fire noob]

yeah valve covers come off like the paint was never there, i sprayed maybe 1/15th a can on a factory d-series cover and the paint ran off with water. but shit that's never supposed to chip like wheels is a different story.

[g2integy]

where gloves my hands starting to peel,but now where as bad as aircraft paint remover

[die in a dick fire noob]

haha, aircraft stripper on the hands fucking blows.

[bb4arson]

haha, aircraft stripper on the hands fucking blows.

its started eating thru my latex gloves

[Owens]

Just tried this on a bike frame that had a crappy paint job on it, pretty cool.

[suCmyxNiiKeSB]

holy crap wouldnt really expect that! could of save me 4 bux more. just bought some aircraft remover today :(

[Random Names From Hell]

i have to strip my valve cover to have it airbrushed and i used extra strengh paint stripper from ace and it bubbles then i hosed it off

[Jdm as whatt?]

nice find man!:goodpost:

[nyenye09]

nice ima try this out

[ALLBLVCK]

Would you do it on your whole body of an integra???